The Hyundai-WIA HD3100 Series is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,800 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA HD3100 Series lathe: 12 in chuck, 500 mm (19.7 in) turning diameter, 780 mm length, 2,800 rpm, 1,123 N·m, 26 / 18.5 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,800 RPM |
| Spindle Motor Rating | 26.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 10 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 500 mm (19.7 in) |
| Max Spindle Speed | 2,800 rpm |
| Spindle Motor Power | 26 / 18.5 kW (34.9 / 24.8 hp) |
| Turret Stations | 10 standard / 12 M-variants |
| Spindle Drive | Belt |
| Chuck Size | 12 in (305 mm) |
| Max Turning Length | 780 mm (30.7 in) |
| X-Axis Travel | 265 mm (10.4 in) |
| Z-Axis Travel | 830 mm (32.7 in) |
| Rapid Traverse | X/Z: 24 / 30 m/min (945 / 1,181 ipm) |
| Spindle Torque | 1,123 / 657 N·m (828.3 / 484.6 ft-lbf) |
| Tool Capacity | 10 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA HD3100 Series is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA HD3100 Series is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
No. X travel is the same 265 mm (10.4 in) and spindle power the same 26 / 18.5 kW (34.9 / 24.8 hp), but the chuck grows from 10 in (254 mm) on the HD2600 Series to 12 in (305 mm) and turning diameter from 460 mm (18.1 in) on the HD2600 Series to 500 mm (19.7 in). Z travel is 830 mm (32.7 in) against the 680 mm (26.8 in) of the HD2600 Series. The spindle is slower and stronger too: 2,800 rpm against 3,500 rpm on the HD2600 Series.
Hyundai WIA lists 10 stations as standard and 12 on M-variants. The tool capacity row gives 10 tools, which matches the standard turret. The series table carries no live-tool speed or power, so those figures need to be requested for an M-variant.
The series table lists a 12 in (305 mm) chuck. Hyundai WIA's tables for related models differ: the HD3100A/MA is listed with a 10 in chuck and 734 / 522 Nm of torque, and the HD3100LY/LYA with a 12 in chuck on the HD3100LY and a 10 in chuck on the HD3100LYA. Confirm the chuck and the torque figure together, because the two go hand in hand in this family.
Three things the table leaves open. First, the variant: turret stations and chuck size change with it. Second, bar capacity, weight and electrical supply, none of which the series table gives. Third, whether 2,800 rpm is enough for your smallest diameters, since the HD2600 Series offers 3,500 rpm on the same 26 / 18.5 kW (34.9 / 24.8 hp).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.