The Hyundai-WIA HD3100A/MA is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA HD3100A/MA CNC lathes: 10 in chuck, 265 / 830 mm X / Z travel, 26 / 18.5 kW spindle with 734 / 522 Nm, 10 or 12 tools by model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 26.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 3100 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 26 / 18.5 kW |
| Spindle Drive | Belt |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Chuck Size | 10 in |
| Rapid Traverse Xz | 24 / 30 m/min |
| Spindle Drive Type | Belt |
| Spindle Torque | 734 / 522 Nm |
| Tool Capacity | HD3100A: 10; HD3100MA: 12 |
| Travel Xz | 265 / 830 mm |
| Catalogue Models | HD3100A, HD3100MA |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA HD3100A/MA is estimated between $47,000 and $93,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
In Hyundai WIA's headline table, tool count: the HD3100A is listed with 10 tools and the HD3100MA with 12. Chuck size, spindle power, torque, travels and rapids are given as one set of figures for both. Ask for each model's full specification to see what else differs.
Chuck and torque. The HD3100 Series is listed with a 12 in (305 mm) chuck and 1,123 / 657 N·m (828.3 / 484.6 ft-lbf) at up to 2,800 rpm. The HD3100A/MA has a 10 in chuck and 734 / 522 Nm. Travels match the HD3100 Series at 265 mm (10.4 in) in X and 830 mm (32.7 in) in Z, and motor power is 26 / 18.5 kW on both.
Same spindle figures, longer Z. The HD2208/2600 has the 10 in chuck, 26 / 18.5 kW and 734 / 522 Nm too, with 265 / 680 mm of X / Z travel and 10 tools. The HD3100A/MA extends Z travel to 830 mm, and the HD3100MA has 12 tools.
X travel is 265 mm and Z travel is 830 mm. Rapids are 24 m/min (945 ipm) in X and 30 m/min (1,181 ipm) in Z. A full-length Z move at that rate is quick, so on long shafts cutting time, not positioning, dominates the cycle.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.