The Hyundai-WIA KBN1300C is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 2,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KBN1300C boring machine: 2,000 x 1,800 mm table, 15,000 kg load, 3,000 x 2,000 x 1,500 mm travels, 2,500 rpm ISO #50, 3,377 N·m.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,500 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | ISO #50 |
| Table / Platter / Chuck Size | 2,000 x 1,800 mm (78.7 x 70.9 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 2,000 x 1,800 mm (78.7 x 70.9 in) |
| X-Axis Travel | 3,000 mm (118 in) |
| Y-Axis Travel | 2,000 mm (78.7 in) |
| Z-Axis Travel | 1,500 mm (59.1 in) |
| Travel W | 700 mm (27.6 in) |
| Max Spindle Speed | 2,500 rpm |
| Spindle Taper | ISO #50 |
| Spindle Drive | 2 단 기어 (ZF 감속기) |
| Tool Capacity | 60 tools (90 optional) |
| Rapid Traverse | X/Y/Z/W: 10 / 10 / 10 / 8 m/min (394 / 394 / 394 / 315 ipm) |
| Max Table Load | 15,000 kg (33,069 lb) (20,000 kg (44,092 lb) optional) |
| Pallet Size | 2,000×1,800 |
| Travel Axes | X/Y/Z: 3,000 / 2,000 / 1,500 / 700 mm (118.1 / 78.7 / 59.1 / 27.6 in) (4,000 mm (157.5 in), 2,500 mm (98.4 in), 2,000 mm (78.7 in) optional) |
| Spindle Motor Power | 37 / 30 kW (49.6 / 40.2 hp) (45 / 37 kW (60.3 / 49.6 hp) optional) |
| Spindle Torque | 3,377 / 2,739 N·m (2,490.9 / 2,020.3 ft-lbf) |
| Slide Type | BOX GUIDE |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA KBN1300C is estimated between $59,500 and $105,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $922 / month.
3,000 mm (118 in) in X, 2,000 mm (78.7 in) in Y, 1,500 mm (59.1 in) in Z and 700 mm (27.6 in) in W. Optional travels of 4,000 mm (157.5 in), 2,500 mm (98.4 in) and 2,000 mm (78.7 in) are listed in the same X, Y, Z order. Confirm with the quotation which extended axes are included, because the table gives them as a group.
15,000 kg (33,069 lb) as standard on the 2,000 x 1,800 mm (78.7 x 70.9 in) table. A 20,000 kg (44,092 lb) rating is listed as an option. Fixtures, angle plates and risers count toward the limit, so add them to the casting weight before deciding whether the option is needed.
37 / 30 kW (49.6 / 40.2 hp) and 3,377 / 2,739 N·m (2,490.9 / 2,020.3 ft-lbf), with a maximum of 2,500 rpm through a two-step gear drive. A 45 / 37 kW (60.3 / 49.6 hp) motor is optional. The taper is ISO #50.
The magazine holds 60 tools, or 90 with the option. Rapids are 10 m/min (394 ipm) in X, Y and Z and 8 m/min (315 ipm) in W, on box guides. On a machine with 3,000 mm (118 in) of X, crossing the full stroke at that rate is a noticeable part of the cycle, so group operations by position where the process allows.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.