The Hyundai-WIA KF-50 II Series is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF Plus. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KF-50 II Series: 1,020 x 510 x 510 mm travels, HSK-A63 direct-drive spindle at 12,000 RPM (15K/20K options), 30 tools, 800 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A63 |
| Approx. Machine Weight | 8,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,020 mm (40.2 in) |
| Y-Axis Travel | 510 mm (20.1 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Table Load Max | 800 kg (1,764 lb) |
| Max Spindle Speed | 12,000 RPM (15K/20K options) |
| Spindle Taper | HSK-A63 |
| Spindle Drive | Direct Drive |
| Atc Capacity | 30 tools (40 optional) |
| Atc Type | Servo-driven arm type |
| Rapid Traverse | 48 m/min (1,890 ipm) |
| Guideway Type | Linear roller guideways |
| Positioning Accuracy | ±0.005 mm (±0.0002 in) |
| Repeatability | ±0.003 mm (±0.00012 in) |
| CNC Control | FANUC 0i-MF Plus |
| Machine Weight | 8,200 kg (18,078 lb) |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA KF-50 II Series is estimated between $44,500 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
The listed base speed is 12,000 RPM, with 15K and 20K spindles shown as options. All use a direct-drive HSK-A63 spindle as listed. Power and torque are not given for any of them, so request the spindle data for the speed you intend to order.
1,020 mm (40.2 in) in X, 510 mm (20.1 in) in Y and 510 mm (20.1 in) in Z. The table load is 800 kg (1,764 lb). The table dimensions are not listed, and the figures do not separate the individual models of the series.
30 tools as listed, with a 40-tool magazine available as an option. The changer is a servo-driven arm type. Maximum tool diameter, length and weight are not among the listed figures, so confirm them if you run large cutters.
The listed control is FANUC 0i-MF Plus. Machine weight is listed at 8,200 kg (18,078 lb). Rapid traverse is 48 m/min (1,890 ipm), with positioning accuracy of ±0.005 mm (±0.0002 in) and repeatability of ±0.003 mm (±0.00012 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.