The Hyundai-WIA L2000SY Series is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L2000SY Series: 8 in chuck turning center with Y axis, 5,000 rpm spindle and live tools, 520 mm turning length, 22 / 11 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 420 mm (16.5 in) |
| Max Spindle Speed | 5,000 rpm |
| Spindle Motor Power | 22 / 11 kW (29.5 / 14.8 hp) |
| Turret Stations | 12 |
| Live Tool Speed | 5,000 rpm |
| Spindle Drive | Built in |
| Chuck Size | 8 in (203 mm) |
| Max Turning Length | 520 mm (20.5 in) |
| Travel Axes | X/Y/Z: 265 / 120 / 590 / 590 mm (10.4 / 4.7 / 23.2 / 23.2 in) |
| Rapid Traverse | X/Y/Z: 30 / 10 / 30 / 30 m/min (1,181 / 394 / 1,181 / 1,181 ipm) |
| Spindle Torque | 358 / 301 N·m (264.1 / 222 ft-lbf) |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L2000SY Series is estimated between $45,000 and $80,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
An 8 in (203 mm) chuck on a built-in spindle that runs to 5,000 rpm, with 22 / 11 kW (29.5 / 14.8 hp) and 358 / 301 N·m (264.1 / 222 ft-lbf). The table gives no bar capacity or spindle bore.
Maximum turning length is 520 mm (20.5 in) and maximum turning diameter is listed as 420 mm (16.5 in). That diameter is the same one listed for the larger-chuck L2600SY Series and L3000SY Series, so treat it as tool reach and check what an 8 in (203 mm) chuck can actually hold for your part.
The travel row lists 265 / 120 / 590 / 590 mm (10.4 / 4.7 / 23.2 / 23.2 in) under X/Y/Z. The first three are X, Y and Z; the fourth is not labelled and equals Z. Rapid traverse is given the same way: 30 / 10 / 30 / 30 m/min (1,181 / 394 / 1,181 / 1,181 ipm).
The L2600SY Series is the longer, stronger machine: a 10 in (254 mm) chuck, 760 mm (29.9 in) of turning length, 830 mm (32.7 in) of Z and 599 / 409 N·m (441.8 / 301.7 ft-lbf), at a lower 4,000 rpm. The L2000SY Series has the 8 in (203 mm) chuck, 520 mm (20.5 in) of turning length and 5,000 rpm. Both have a 12-station turret and 5,000 rpm live tools.
Less so than its siblings. Torque is 358 / 301 N·m (264.1 / 222 ft-lbf), and the L3000SY Series in the same table lists 1,262 / 1,003 N·m (930.9 / 739.8 ft-lbf). The L2000SY Series is the pick when speed matters more: it reaches 5,000 rpm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.