The Hyundai-WIA L200MC is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i-TF Plus. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L200MC: 6 in chuck live-tool lathe, 270 mm turning diameter, 500 mm length, 5,000 RPM spindle, 6,000 RPM live tools, ±40 mm Y axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 6 in (152 mm) |
| Swing Over Bed | 310 mm (12.2 in) |
| Max Turning Diameter | 270 mm (10.6 in) |
| Max Turning Length | 500 mm (19.7 in) |
| Max Spindle Speed | 5,000 RPM |
| Spindle Motor Power | 15/11 kW (10 min/continuous) (20/15 hp) |
| Spindle Bore | 52 mm (2.0 in) |
| Y Axis Travel | ±40 mm (±1.57 in) |
| Live Tool Speed Max | 6,000 RPM |
| Turret Stations | 12 |
| Rapid Traverse Z | 30 m/min |
| Rapid Traverse X | 24 m/min |
| CNC Control | Fanuc 0i-TF Plus |
| Machine Weight | Approx. 4,500 kg (9,921 lb) |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L200MC is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
The listed maximum turning diameter is 270 mm (10.6 in) and the maximum turning length is 500 mm (19.7 in), on a 6 in (152 mm) chuck. Swing over the bed is 310 mm (12.2 in) and the spindle bore is 52 mm (2.0 in).
The listed table shows both. Live tools run at up to 6,000 RPM on the 12-station turret, and Y-axis travel is ±40 mm (±1.57 in). On a used machine, confirm that the Y axis and the live-tool drive are fitted and working, since the table is all there is to go on for this model.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L200MC is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
Rapid traverse is listed at 30 m/min on Z and 24 m/min on X. Machine weight is approx. 4,500 kg (9,921 lb), which is the figure to give a rigger and to check against the floor where the machine will stand.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.