The Hyundai-WIA L230A is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc i-Series. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L230A: older lathe with 310 mm turning diameter, 521 mm length, 65 mm bar capacity, A2-6 spindle, 4,000 RPM, 15/11 kW, 12 stations.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc i-Series |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 310 mm |
| Max Turning Length | 521 mm |
| Chuck Size | 210 mm |
| Bar Capacity | 65 mm |
| Swing Over Bed | 600 mm (23.6 in) |
| Swing Over Carriage | 356 mm (14 in) |
| Max Spindle Speed | 4,000 RPM |
| Spindle Motor Power | 15/11 kW |
| Spindle Nose | A2-6 |
| Turret Stations | 12 |
| Turret Type | BMT/BOT turret |
| Guideway Type | Linear guides |
| Machine Dimensions | 2,760 x 1,685 mm (108.7 x 66.3 in) |
| Machine Height | 1,860 mm (73.2 in) |
| CNC Control | Fanuc i-Series |
| X-Axis Travel | 220 mm |
| Z-Axis Travel | 560 mm |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L230A is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
It is not in Hyundai WIA's current lineup and may be an older model. In the present L family the L300A is listed with a 10 in (254 mm) chuck, 500 mm (19.7 in) of turning diameter, 720 mm (28.3 in) of turning length and 22 / 18.5 kW (29.5 / 24.8 hp), which is a size above the L230A.
The listed figures are 310 mm of maximum turning diameter, 521 mm of maximum turning length and 65 mm of bar capacity, with a 210 mm chuck. Travels are 220 mm in X and 560 mm in Z. Swing over the carriage is 356 mm (14 in), so parts larger than that cannot pass over the cross slide.
A 12-station turret, listed as BMT/BOT. The listing does not say which of the two a particular machine carries, and no live-tool speed is given. On a used machine, check the turret face and the holders supplied with it, because replacement tooling has to match the mount.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L230A is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.