The Hyundai-WIA L3000SY Series is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 3,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L3000SY Series: 12 in chuck turning center, 1,262 / 1,003 N·m, 37 / 25 kW, 3,000 rpm, 420 mm turning diameter, Y axis, live tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,000 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 420 mm (16.5 in) |
| Max Spindle Speed | 3,000 rpm |
| Spindle Motor Power | 37 / 25 kW (49.6 / 33.5 hp) |
| X-Axis Travel | 265 mm (10.4 in) |
| Y-Axis Travel | 120 mm (4.7 in) |
| Z-Axis Travel | 830 mm (32.7 in) |
| Travel Zb | 830 mm (32.7 in) |
| Rapid Traverse | X/Y/Z: 30 / 10 / 30 / 30 m/min (1,181 / 394 / 1,181 / 1,181 ipm) |
| Turret Stations | 12 |
| Live Tool Speed | 5,000 rpm |
| Chuck Size | 12 in (305 mm) |
| Max Turning Length | 760 mm (29.9 in) |
| Travel Axes | X/Y/Z: 265 / 120 / 830 / 830 mm (10.4 / 4.7 / 32.7 / 32.7 in) |
| Spindle Torque | 1,262 / 1,003 N·m (930.9 / 739.8 ft-lbf) |
| Spindle Drive | Built in |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L3000SY Series is estimated between $53,500 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $829 / month.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L3000SY Series is estimated between $53,500 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $829 / month.
Not in working envelope. Both list 420 mm (16.5 in) maximum turning diameter, 760 mm (29.9 in) turning length and travels of 265 mm (10.4 in), 120 mm (4.7 in) and 830 mm (32.7 in). The L3000SY Series has the larger chuck, 12 in (305 mm) against the 10 in (254 mm) of the L2600SY Series, and the stronger spindle.
Speed. The main spindle stops at 3,000 rpm, so small diameters run well below the surface speed carbide tooling prefers in free-cutting materials. The L2000SY Series in the same table reaches 5,000 rpm with an 8 in (203 mm) chuck and is the better fit for that kind of work.
Yes, within limits. The 12-station turret carries live tools that run to 5,000 rpm, and the Y axis travels 120 mm (4.7 in) at a rapid rate of 10 m/min (394 ipm). The table lists no live tool power or torque.
The table omits bar capacity, the tooling interface of the turret, live tool power, and any figures for what is carried on the 830 mm (32.7 in) ZB axis. It also lists no machine weight or power supply. Get those in writing if the job depends on them.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.