The Hyundai-WIA L300LMA is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L300LMA: 1280 mm turning length, 410 mm diameter, 10 in chuck, 3,500 rpm belt-driven spindle, 22 / 18.5 kW, live tools at 4,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 410 mm (16.1 in) |
| Max Turning Length | 1280 mm (50.4 in) |
| Chuck Size | 10 in (254 mm) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Motor Power | 22 / 18.5 kW (29.5 / 24.8 hp) |
| Live Tool Speed | 4,000 rpm |
| Turret Stations | 12 |
| X-Axis Travel | 290 mm (11.4 in) |
| Z-Axis Travel | 1,350 mm (53.1 in) |
| Rapid Traverse | X/Z: 20 / 24 m/min (787 / 945 ipm) |
| Spindle Torque | 493.4 / 414.9 N·m (363.9 / 306 ft-lbf) |
| Spindle Drive | Belt |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L300LMA is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
Maximum turning length is 1280 mm (50.4 in), with 1,350 mm (53.1 in) of Z travel. Maximum turning diameter is 410 mm (16.1 in) and X travel is 290 mm (11.4 in). For comparison, the L300A turns 720 mm (28.3 in) long and 500 mm (19.7 in) in diameter.
WIA lists live tools at 4,000 rpm on a 12-station turret. The table shows X and Z travel only and no Y travel, so plan on centreline work such as cross drilling, face drilling and slots rather than off-centre milling.
Belt. The table lists a belt-driven spindle with 493.4 / 414.9 N·m (363.9 / 306 ft-lbf) of torque, 22 / 18.5 kW (29.5 / 24.8 hp) of power and a 3,500 rpm maximum. The L300A uses a gear drive and lists 739 / 622 N·m (545.1 / 458.8 ft-lbf) from the same motor figures.
Both list 4,000 rpm live tools and 22 / 18.5 kW (29.5 / 24.8 hp). The L300LMA is the long one, with a 10 in (254 mm) chuck, 1280 mm (50.4 in) of turning length and 410 mm (16.1 in) of turning diameter. The L300MC is short and wide: a 12 in (305 mm) chuck, 600 mm (23.6 in) of turning length, 500 mm (19.7 in) of diameter and a 3,000 rpm spindle.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.