The Hyundai-WIA L4000L Series is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L4000L Series: long-bed lathe, 2138 mm turning length, 570 mm diameter, 15 in chuck, 35 kW gear-driven spindle, 2,450 N·m, 2,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,000 RPM |
| Spindle Motor Rating | 35.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 10 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 570 mm (22.4 in) |
| Max Spindle Speed | 2,000 rpm |
| Spindle Motor Power | 35 kW (46.9 hp) |
| Spindle Drive | GEAR |
| Turret Stations | 10 (L4000L/LC) / 12 (L4000LM/LMC) |
| Live Tool Speed | 4,000 RPM (LM/LMC only) |
| Chuck Size | 15 in (381 mm) |
| Max Turning Length | 2138 mm (84.2 in) |
| X-Axis Travel | 330 mm (13 in) |
| Z-Axis Travel | 2,200 mm (86.6 in) |
| Rapid Traverse | X/Z: 16 / 20 m/min (630 / 787 ipm) |
| Spindle Torque | 2,450 N·m (1,807.1 ft-lbf) |
| Tool Capacity | 10 tools (12 optional) |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L4000L Series is estimated between $52,500 and $102,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
Maximum turning length is 2138 mm (84.2 in) and Z travel is 2,200 mm (86.6 in). Maximum turning diameter is 570 mm (22.4 in) with a 15 in (381 mm) chuck, and X travel is 330 mm (13 in). Work this long needs tailstock or steady-rest support, which the headline table does not describe, so confirm it with WIA.
Only in length, as far as the tables show. The L4000 Series turns 1043 mm (41.1 in) on 1105 mm (43.5 in) of Z travel, while the L4000L turns 2138 mm (84.2 in) on 2,200 mm (86.6 in). The spindle, chuck, turning diameter, X travel and rapids carry the same figures.
The live-tool row applies to the LM/LMC models only, at 4,000 RPM, and those models have a 12-station turret. The L4000L/LC is listed with 10 stations and no live tools. The tool capacity row reads 10 tools with 12 optional. None of the models lists Y travel.
A gear-driven spindle listed at 35 kW (46.9 hp) and 2,450 N·m (1,807.1 ft-lbf), with a maximum speed of 2,000 rpm. It is the same set of figures WIA gives for the shorter L4000 Series.
They overlap in length but not in purpose. The L4000L Series turns 2138 mm (84.2 in) with a 15 in (381 mm) chuck and runs to 2,000 rpm. The L5100LY turns 2070 mm (81.5 in) with a 21 in (533 mm) chuck, tops out at 1,500 rpm and adds 150 mm (5.9 in) of Y travel with 4,000 rpm live tools, so it is the choice when off-centre milling is part of the job.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.