The Hyundai-WIA L5100LY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 1,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L5100LY: Y-axis turning center, 21 in chuck, 610 mm diameter, 2070 mm length, 150 mm Y travel, 45 / 37 kW spindle, 4,000 rpm live tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 1,500 RPM |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 610 mm (24 in) |
| Max Spindle Speed | 1,500 rpm |
| Spindle Motor Power | 45 / 37 kW (60.3 / 49.6 hp) |
| Spindle Drive | 2 Step Gear + Belt |
| Turret Stations | 12 |
| Live Tool Speed | 4,000 rpm |
| Chuck Size | 21 in (533 mm) |
| Max Turning Length | 2070 mm (81.5 in) |
| X-Axis Travel | 360 mm (14.2 in) |
| Y-Axis Travel | 150 mm (5.9 in) |
| Z-Axis Travel | 2,120 mm (83.5 in) |
| Rapid Traverse | X/Y/Z: 20 / 12 / 18 m/min (787 / 472 / 709 ipm) |
| Spindle Torque | 2,990 / 2,459 N·m (2,205.4 / 1,813.8 ft-lbf) |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L5100LY is estimated between $49,500 and $97,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L5100LY is estimated between $49,500 and $97,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
The L5100LY adds 150 mm (5.9 in) of Y travel and 4,000 rpm live tools. In exchange its turning diameter is 610 mm (24 in) where the L5100L Series lists 760 mm (29.9 in), its turning length is 2070 mm (81.5 in) against 2205 mm (86.8 in), and its torque is 2,990 / 2,459 N·m against 4,112 / 3,382 N·m on the L5100L. Both use a 21 in (533 mm) chuck and 45 / 37 kW (60.3 / 49.6 hp).
Maximum speed is 1,500 rpm. Power is listed as 45 / 37 kW (60.3 / 49.6 hp) and torque as 2,990 / 2,459 N·m (2,205.4 / 1,813.8 ft-lbf), through a drive WIA describes as 2 Step Gear + Belt. The table does not label the two figures in each pair, so confirm the continuous rating with WIA.
Up to 610 mm (24 in) in turning diameter and 2070 mm (81.5 in) in turning length, held in a 21 in (533 mm) chuck. Parts of that length and weight need tail and intermediate support, and the headline table gives no figures for either, so ask WIA what is fitted.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.