The Hyundai-WIA LF2200 II Series is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA LF2200 II Series: short-stroke chucking lathe, 260 mm turning diameter, 140 mm X and 170 mm Z travel, 4,500 RPM spindle, 15/11 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 260 mm (10.2 in) |
| Max Spindle Speed | 4,500 RPM |
| Spindle Motor Power | 15/11 kW (20/15 hp) |
| Rapid Traverse | 24/24 m/min (945 ipm) X/Z |
| Spindle Drive | Belt |
| X-Axis Travel | 140 mm (5.5 in) |
| Z-Axis Travel | 170 mm (6.7 in) |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA LF2200 II Series is estimated between $36,500 and $75,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $566 / month.
Maximum turning diameter is 260 mm (10.2 in). X travel is 140 mm (5.5 in) and Z travel is 170 mm (6.7 in), so the machine suits short, disc-shaped workpieces. WIA's series rows here do not give a chuck size or a maximum turning length.
Size and speed. The LF2200 II turns 260 mm (10.2 in) and runs to 4,500 RPM with 140 mm (5.5 in) of X and 170 mm (6.7 in) of Z travel. The LF2600 II Series turns 360 mm (14.2 in), is limited to 3,500 RPM and has 190 mm (7.5 in) of X and 200 mm (7.9 in) of Z. Both list a belt-driven 15/11 kW (20/15 hp) spindle.
Maximum spindle speed is 4,500 RPM. The spindle is belt driven and the motor is listed at 15/11 kW (20/15 hp). No torque figure appears in the series rows.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.