The Hyundai-WIA LV1400 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 492 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA LV1400 vertical turning center: 1,400 mm (55.1 in) turning diameter, 492 rpm gear-driven spindle, 8,035 / 6,515 N·m, 37 / 30 kW, 12 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 492 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 1400 mm (55.1 in) |
| Max Turning Height | 850 mm (33.5 in) |
| Table Speed Max | 492 RPM |
| Spindle Motor Power | 37 / 30 kW (49.6 / 40.2 hp) |
| Z-Axis Travel | 800 mm (31.5 in) |
| Rapid Traverse | X/Z: 12 / 12 m/min (472 / 472 ipm) |
| Turret Stations | 12 |
| Spindle Drive | GEAR |
| Max Turning Length | 850 mm (33.5 in) |
| Max Spindle Speed | 492 rpm |
| Spindle Torque | 8,035 / 6,515 N·m (5,926.6 / 4,805.5 ft-lbf) |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA LV1400 is estimated between $53,000 and $102,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA LV1400 is estimated between $53,000 and $102,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
1,400 mm (55.1 in) in diameter and 850 mm (33.5 in) in height. Z travel is 800 mm (31.5 in). X travel and table load are not in the table, so check them against the part and fixture.
The LV2000MM is the larger machine at 2000 mm (78.7 in) of turning diameter and 1700 mm (66.9 in) of turning length, with 22,096 / 17,916 N·m (16,298 / 13,214.8 ft-lbf), 258 rpm, 18 tools and 2,400 rpm live tooling. The LV1400 turns 1,400 mm (55.1 in) at up to 492 rpm with 12 tools. Both are listed at 37 / 30 kW (49.6 / 40.2 hp).
The table for the LV1400 lists a 12-station turret and no live tool speed. If milling or drilling is needed on the same machine, the LV2000MM is listed with live tools at 2,400 rpm; otherwise confirm the options with Hyundai WIA.
12 / 12 m/min (472 / 472 ipm) on X/Z. That is the same as the LV2000MM and half the 24/24 m/min (945 ipm) of the LV1100 Series, so plan cycle times around cutting, not positioning.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.