The Hyundai-WIA LV500 Series is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA LV500 Series vertical turning centers: 550 mm (21.7 in) diameter, 600 mm height, 2,000 RPM, 22/18.5 kW, 8 or 12 turret stations.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 550 mm (21.7 in) |
| Max Turning Height | 600 mm (23.6 in) |
| Table Speed Max | 2,000 RPM |
| Spindle Motor Power | 22/18.5 kW (29.5/24.8 hp) |
| X-Axis Travel | 325 mm (12.8 in) |
| Z-Axis Travel | 625 mm (24.6 in) |
| Rapid Traverse | 20/18 m/min (787/709 ipm) X/Z |
| Turret Stations | 8 or 12 (model dependent) |
| Spindle Drive | Belt |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA LV500 Series is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Either 8 or 12, depending on the model. Hyundai WIA's table does not tie the count to a model code, so confirm it when specifying the machine, especially if the part family needs more than eight tools.
Up to 550 mm (21.7 in) in turning diameter and 600 mm (23.6 in) in turning height. X travel is 325 mm (12.8 in) and Z travel 625 mm (24.6 in).
Table speed is 2,000 RPM with a belt drive, and spindle power is listed at 22/18.5 kW (29.5/24.8 hp). The table gives no torque figure for the series.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.