The Hyundai-WIA SE2200A Series is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA SE2200A Series: 6 in (152 mm) chuck lathe with a 6,000 rpm spindle, 350 mm (13.8 in) turning diameter, 340 mm turning length, 12 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 350 mm (13.8 in) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Motor Power | 15 / 11 kW (20.1 / 14.8 hp) |
| Turret Stations | 12 |
| Bed Angle | 30 degrees |
| Spindle Drive | Belt |
| Chuck Size | 6 in (152 mm) |
| Max Turning Length | 340 mm (13.4 in) |
| X-Axis Travel | 210 mm (8.3 in) |
| Z-Axis Travel | 340 mm (13.4 in) |
| Rapid Traverse | X/Z: 30 / 36 m/min (1,181 / 1,417 ipm) |
| Spindle Torque | 127 / 70 N·m (93.7 / 51.6 ft-lbf) |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA SE2200A Series is estimated between $40,000 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $620 / month.
For speed on small parts. The SE2200A Series runs to 6,000 rpm with a 6 in (152 mm) chuck, while the SE2200 Series runs to 4,500 rpm with an 8 in (203 mm) chuck. The trade-off is torque: 127 / 70 N·m (93.7 / 51.6 ft-lbf) against 167 / 92 N·m (123.2 / 67.9 ft-lbf) on the SE2200 Series.
340 mm (13.4 in), equal to the Z travel. Maximum turning diameter is 350 mm (13.8 in) and X travel is 210 mm (8.3 in). The SE2200 Series, with its larger chuck, is listed at 307 mm (12.1 in) of turning length.
A 6 in (152 mm) chuck. The SE2200 Series is listed with an 8 in (203 mm) chuck and the SE2200LC Series with a 10 in (254 mm) chuck and 560 mm (22 in) of Z travel.
15 / 11 kW (20.1 / 14.8 hp) and 127 / 70 N·m (93.7 / 51.6 ft-lbf), with a top speed of 6,000 rpm through a belt drive. The table does not label the two figures in each pair, so ask Hyundai WIA which rating each one is.
Hyundai WIA's table for the series lists no live tool speed and no Y axis, only a 12-station turret with 12 tools. The SE2200Y Series is the related model listed with 6,000 rpm live tools and 110 mm (4.3 in) of Y travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.