The Hyundai-WIA SE2600Y Series is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i Plus (15" touchscreen). a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA SE2600Y Series: 10 in (254 mm) chuck, 470.9 / 286.4 N·m spindle, 110 mm (4.3 in) Y axis, 6,000 rpm live tools, 653 mm (25.7 in) length.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i Plus (15" touchscreen) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 18.5 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 380 mm (15 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Motor Power | 18.5 / 15 kW (24.8 / 20.1 hp) |
| Rapid Traverse | X/Y/Z: 30 / 10 / 30 m/min (1,181 / 394 / 1,181 ipm) |
| Turret Stations | 12 |
| Live Tool Speed | 6,000 rpm |
| Bed Angle | 30 degrees |
| CNC Control | Fanuc 0i Plus (15" touchscreen) |
| Chuck Size | 10 in (254 mm) |
| Max Turning Length | 653 mm (25.7 in) |
| X-Axis Travel | 255 mm (10 in) |
| Y-Axis Travel | 110 mm (4.3 in) |
| Z-Axis Travel | 680 mm (26.8 in) |
| Spindle Torque | 470.9 / 286.4 N·m (347.3 / 211.2 ft-lbf) |
| Spindle Drive | Belt |
| Tool Capacity | 12 tools |
| Slide Type | ROLLER LM |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA SE2600Y Series is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
The SE2600Y adds 110 mm (4.3 in) of Y travel and 6,000 rpm live tools. In exchange its turning diameter is 380 mm (15 in) where the SE2600 lists 460 mm (18.1 in), and its turning length is 653 mm (25.7 in) against 671 mm (26.4 in). Both have a 10 in (254 mm) chuck, 3,500 rpm and 470.9 / 286.4 N·m (347.3 / 211.2 ft-lbf).
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA SE2600Y Series is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
WIA's table lists a Fanuc 0i Plus with a 15 in touchscreen. The same table gives the slide type as roller LM and the spindle drive as belt. No control options are shown in the rows this page carries.
X travel is 255 mm (10 in), Y is 110 mm (4.3 in) and Z is 680 mm (26.8 in). Rapid traverse is 30 m/min (1,181 ipm) on X and Z and 10 m/min (394 ipm) on Y. The bed angle is 30 degrees.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.