The Hyundai-WIA XF6300 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 15,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA XF6300 5-axis machining center: Ø630 mm table, 600 kg load, 650 x 600 x 500 mm travels, 60 m/min rapids, 15,000 rpm HSK-A63 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Motor Rating | 31.0 kW |
| Spindle Taper Interface | HSK-A63 (40K : HSK-E40 optional) |
| Table / Platter / Chuck Size | Ø630 mm (24.8 in) |
| Max Table Load Capacity | 600 kg |
| Automatic Tool Changer (ATC) | 34 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Diameter | 630 mm (24.8 in) |
| X-Axis Travel | 650 mm (25.6 in) |
| Y-Axis Travel | 600 mm (23.6 in) |
| Z-Axis Travel | 500 mm (19.7 in) |
| Max Spindle Speed | 15,000 rpm (24,000 rpm, 40,000 rpm optional) |
| Spindle Taper | HSK-A63 (40K : HSK-E40 optional) |
| Max Workpiece Height | 500 mm (19.7 in) |
| Atc Capacity | 60 tools (90 optional) |
| Table Size | Ø630 mm (24.8 in) |
| Max Table Load | 600 kg (1,323 lb) |
| Rapid Traverse | X/Y/Z: 60 / 60 / 60 m/min (2,362 / 2,362 / 2,362 ipm) |
| Spindle Motor Power | 31 / 25 kW (41.6 / 33.5 hp) (26 / 20 kW (34.9 / 26.8 hp), 26 / 18 kW (34.9 / 24.1 hp) optional) |
| Spindle Torque | 153 / 123 N·m (112.9 / 90.7 ft-lbf) (85.9 / 66.5 N·m (63.4 / 49.1 ft-lbf), 9.9 / 6.9 N·m (7.3 / 5.1 ft-lbf) optional) |
| Spindle Drive | BUILT-IN |
| Tool Capacity | 34, tools (68, 102 optional) |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA XF6300 is estimated between $135,000 and $278,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,093 / month.
The standard spindle is a 15,000 rpm built-in unit on HSK-A63, rated 31 / 25 kW (41.6 / 33.5 hp) and 153 / 123 N·m (112.9 / 90.7 ft-lbf). Options are 24,000 rpm and 40,000 rpm. The option ratings are listed, in that order, as 26 / 20 kW (34.9 / 26.8 hp) with 85.9 / 66.5 N·m (63.4 / 49.1 ft-lbf), and 26 / 18 kW (34.9 / 24.1 hp) with 9.9 / 6.9 N·m (7.3 / 5.1 ft-lbf). Confirm which rating goes with which speed on the quotation.
HSK-A63 on the standard 15,000 rpm spindle. Hyundai WIA's table marks the 40,000 rpm option as HSK-E40, a smaller interface, so holders are not shared between that spindle and an HSK-A63 machine. Plan the tooling inventory around the spindle you order.
Up to 500 mm (19.7 in) tall and 600 kg (1,323 lb) on the Ø630 mm (24.8 in) table. Travels are 650 mm (25.6 in) in X, 600 mm (23.6 in) in Y and 500 mm (19.7 in) in Z. Because the maximum part height equals the Z travel, a tall part leaves little stroke for long tools, so check the tool lengths you need against the part at full height.
The XF8500 is larger and slower: a Ø850 mm (33.5 in) table, 1,000 kg (2,205 lb) of table load, travels of 850 mm (33.5 in), 920 mm (36.2 in) and 600 mm (23.6 in), and rapids of 45 / 45 / 45 m/min (1,772 / 1,772 / 1,772 ipm). The XF6300 carries 600 kg (1,323 lb) on Ø630 mm (24.8 in) and moves at 60 / 60 / 60 m/min (2,362 / 2,362 / 2,362 ipm). Both start with a 15,000 rpm HSK-A63 spindle at 31 / 25 kW (41.6 / 33.5 hp).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.