The Hyundai-WIA Hyundai WIA SE2008/SE2008M is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i-TF Plus. It offers working travels of 210 x x 330 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA SE2008/SE2008M: 6,000 RPM spindle, 15/11 kW (20/15 hp), 330 mm (13 in) Z travel, 370 or 320 mm turning diameter. Not in the current lineup.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 210 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 330 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 370 mm (14.6 in) SE2008 / 320 mm (12.6 in) SE2008M |
| Max Spindle Speed | 6,000 RPM |
| Spindle Motor Power | 15/11 kW (20/15 hp) |
| X Axis Travel | 210 mm (8.3 in) |
| Z Axis Travel | 330 mm (13 in) |
| Rapid Traverse X | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 36 m/min (1,417 ipm) |
| Turret Stations | 12 |
| Guideway Type | Linear motion guides |
| Bed Angle | 45 degrees |
| Spindle Drive | Belt driven |
| CNC Control | Fanuc 0i-TF Plus |
Our best estimate for the Hyundai WIA SE2008/SE2008M is $50,000 - $75,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-se2008se2008m#price; the request is passed to Hyundai WIA or an authorised dealer.
In the listed figures, only the maximum turning diameter: 370 mm (14.6 in) on the SE2008 and 320 mm (12.6 in) on the SE2008M. Spindle speed, power, travels, rapids, turret and control are given once for both. The rows do not describe any equipment the SE2008M adds.
It does not appear in Hyundai WIA's current lineup. Treat the listed figures as a guide to a used machine and check them against the serial plate and manual. In the present range the SE2200A lists a 6,000 rpm spindle with 15 / 11 kW (20.1 / 14.8 hp) and 340 mm (13.4 in) of Z travel.
A belt-driven spindle with a maximum of 6,000 RPM and 15/11 kW (20/15 hp), and a Fanuc 0i-TF Plus control. The bed is at 45 degrees and the turret has 12 stations. Torque and chuck size are not listed.
Z travel is 330 mm (13 in) and X travel is 210 mm (8.3 in). No maximum turning length is listed, and the usable length will be shorter than the Z travel once the chuck and jaws are accounted for, so measure on the machine.
