The Makino EDNC-8 is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino EDNC-8 sinker EDM: 800 x 500 mm X/Y, 1,100 x 700 mm table, 3,000 kg parts, wide-tank version to 1,800 x 1,200 mm, HS-Rib option.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 1,100 x 700 mm (43.3 in x 27.6 in) |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 1,100 x 700 mm (43.3 in x 27.6 in) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 500 mm (19.7 in) |
| Z-Axis Travel | 400 mm (500 mm) (15.8 in (19.7 in)) |
| Rapid Traverse | 5 m/min (197 in/min) |
| Max Workpiece Weight | 3,000 kg (6,614 lb) |
| Tool Capacity | 16, 32 |
| Work Tank Size | 1,400 x 900 x 500 mm (55.1 in x 35.4 in x 19.7 in) |
| Max Electrode Weight | 100 kg (220 lb) |
| Max Machining Current | 60A ~ 240A |
According to secondary market equipment benchmarks for November 2026, the Makino EDNC-8 is estimated between $51,000 and $101,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
A standard version that supports workpieces up to 55.1” x 35.4” (1,400mm x 900mm) with a three-sided programmable rise-and-fall work tank, and a wide-tank version for parts up to 70.8” x 47.2” (1,800mm x 1,200mm) with a programmable rise-and-fall front door.
According to secondary market equipment benchmarks for November 2026, the Makino EDNC-8 is estimated between $51,000 and $101,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
A high-speed Z-axis with jump motions up to 20 m/min at 1.5G acceleration. Liquid core cooling of the ballscrew maintains depth control, and Makino says the option can reduce machining times by up to 60 percent, giving the speed of smaller machines on this larger platform.
The table gives 60A ~ 240A. That reads as a range rather than one figure, so the quotation should state which generator is fitted. Makino pairs the generator with the HyperCut and SuperSpark IV technologies run from the Hyper-i control.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.