The Makino F5 Professional 6 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino F5 Professional 6 hard-milling VMC: 900 x 500 x 450 mm travels, 20,000 rpm HSK-A63 spindle (30,000 optional), 30 tools, 1,000 kg parts.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | HSK-A63 (Optional HSK-F63) |
| Table / Platter / Chuck Size | 1,000 x 500 mm (39.4 in x 19.7 in) |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 1,000 x 500 mm (39.4 in x 19.7 in) |
| X-Axis Travel | 900 mm (35.4 in) |
| Y-Axis Travel | 500 mm (19.7 in) |
| Z-Axis Travel | 450 mm (17.7 in) |
| Max Spindle Speed | 20,000 rpm (Optional: 30,000 rpm) |
| Spindle Taper | HSK-A63 (Optional HSK-F63) |
| Rapid Traverse | 20,000 mm/min (787 ipm) |
| Cutting Feedrate | 20,000 mm/min (787 ipm) |
| Max Workpiece Size | 1,000 x 500 x 450 mm (39.4 in x 19.7 in x 17.7 in) |
| Max Workpiece Weight | 1,000 kg (2,204 lb) |
| Tool Capacity | 30 |
| Max Tool Diameter | 120 mm (4.72 in) |
| Max Tool Weight | 8 kg (17.6 lb) |
According to secondary market equipment benchmarks for November 2026, the Makino F5 Professional 6 is estimated between $61,500 and $110,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $953 / month.
Makino quotes positioning accuracies to within ±0.000060 inch (0.0015mm) and repeatability of ±0.000040 inch (0.001mm). It attributes these to 8mm-fine pitch ballscrews and 0.05-micron scale feedback, both standard, on an axis configuration without overhangs.
The standard spindle runs to 20,000 rpm with an HSK-A63 taper. A 30,000 rpm spindle is optional, and HSK-F63 is listed as the optional taper. Makino's table for this model has no power or torque figures, so request the spindle curves if roughing in hardened steel is part of the plan.
The Makino F8 is the large-part machine: 1,300 mm (51.2 in) of X, 800 mm (31.5 in) of Y and 650 mm (25.6 in) of Z on a 1,550 x 800 mm (61 in x 31.5 in) table, with a 10,000 rpm CAT50 spindle. The F5 Professional 6 is smaller at 900 mm (35.4 in) of X but runs twice the spindle speed on HSK-A63 tooling, which suits small-tool finishing.
Workpieces up to 1,000 x 500 x 450 mm (39.4 in x 19.7 in x 17.7 in) and 1,000 kg (2,204 lb). The magazine holds 30 tools, each up to 120 mm (4.72 in) in diameter and 8 kg (17.6 lb).
SGI.5 is Makino's control technology for complex geometry. Makino says it reduces machining cycle times on dies, complex cavities and cores, and medical parts by as much as 40 percent compared with most other control technologies. That is Makino's own claim; the spec table has no control row.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.