The Makino MAG A5 is an industrial-grade 5-Axis Machining Centers powered by the Makino Professional 6 (Pro 6). a top spindle speed of 33,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino MAG A5, possibly an older model: listed gantry 5-axis, about 5,000 x 2,500 x 1,000 mm travels, 33,000 RPM HSK-A63, 120 tools. Unverified.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Makino Professional 6 (Pro 6) |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 33,000 RPM |
| Spindle Motor Rating | 80.0 kW |
| Spindle Taper Interface | HSK-A63 |
| Automatic Tool Changer (ATC) | 120 Tool Stations |
| Rapid Traverse Rate | 60 m/min (2,362 ipm) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | ~5,000 mm (196.9 in) |
| Y-Axis Travel | ~2,500 mm (98.4 in) |
| Z-Axis Travel | ~1,000 mm (39.4 in) |
| A Axis Range | +30° to -120° (150° total, direct drive) |
| C Axis Range | 360° (continuous, direct drive) |
| Max Spindle Speed | 33,000 RPM |
| Spindle Taper | HSK-A63 |
| Spindle Motor Power | ~80 kW (107 hp) |
| Tool Capacity | 120 tools standard |
| Table Configuration | Fixed table, moving gantry column |
| Rapid Traverse Xy | 60 m/min (2,362 ipm) |
| Rapid Traverse Z | 50 m/min (1,969 ipm) |
| Chip Evacuation | Full-length through-table chip conveyor system |
| CNC Control | Makino Professional 6 (Pro 6) |
According to secondary market equipment benchmarks for November 2026, the Makino MAG A5 is estimated between $140,000 and $285,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,170 / month.
No. It is not in Makino's current lineup and may be an older model. The listed figures could not be checked against a Makino specification, so verify them from the machine and its documentation.
About 5,000 mm (196.9 in) in X, 2,500 mm (98.4 in) in Y and 1,000 mm (39.4 in) in Z, all marked approximate, on a fixed table with a moving gantry column.
The MAG4 has 4,000 mm (157.5 in) of X and 2,200 mm (86.6 in) of Y on a 3,500 x 2,000 mm (137.8 in x 78.7 in) pallet. The MAG.A6 has 6,200 mm (244.1 in) of X and 2,200 mm (86.6 in) of Y on a 6,000 x 2,000 mm (236.0 in x 78.7 in) pallet. Both run 33,000 rpm spindles.
A 33,000 RPM spindle with an HSK-A63 taper and about 80 kW (107 hp), and 120 tools standard. The listed control is Makino Professional 6 (Pro 6).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.