The Makino Pro 3 is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino Pro 3 HMC, no longer in Makino's lineup: 630 x 630 mm pallet, 1,150 x 900 x 900 mm travels, 6,000 RPM 37 kW CAT50 spindle, 80 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | CAT50 (HSK-A100 optional) |
| Automatic Tool Changer (ATC) | 80 Tool Stations |
| Approx. Machine Weight | 28,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Pallet Size | 630 x 630 mm (24.8 x 24.8 in) |
| X Y Z Travel | 1,150 x 900 x 900 mm (45.3 x 35.4 x 35.4 in) |
| Spindle Speed | 6,000 RPM (standard); 10,000 RPM optional |
| Spindle Taper | CAT50 (HSK-A100 optional) |
| Spindle Motor | 37 kW (50 hp) |
| Spindle Torque | 833 Nm (614 ft-lb) |
| Rapid Traverse | 60,000 mm/min (2,362 ipm) |
| Tool Capacity | 80 tools standard; 120 optional |
| Tool Change Time | 4.5 sec (chip-to-chip) |
| Table Load Capacity | 1,000 kg (2,205 lb) |
| Positioning Accuracy | ±0.004 mm (±0.00016 in) |
| Repeatability | ±0.002 mm (±0.00008 in) |
| Cnc Control | Makino Professional 6 (SGI.5) |
| Machine Weight | 28,000 kg (61,729 lb) |
According to secondary market equipment benchmarks for November 2026, the Makino Pro 3 is estimated between $101,000 and $204,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,566 / month.
No machine of this name appears in Makino's current lineup, and the listed figures could not be checked against a Makino model page. Treat the figures as a starting point and confirm the travels, spindle and control on the machine itself.
The listed standard spindle runs to 6,000 RPM with 37 kW (50 hp) and 833 Nm (614 ft-lb) on a CAT50 taper. A 10,000 RPM spindle and an HSK-A100 taper are listed as options, so check which one a used machine actually has.
The listed travels are 1,150 x 900 x 900 mm (45.3 x 35.4 x 35.4 in) over a 630 x 630 mm (24.8 x 24.8 in) pallet, and the listed table load is 1,000 kg (2,205 lb). No maximum workpiece diameter is listed, so measure the swing on the machine.
Both use a 630 mm pallet. The Makino a81nx has 900 mm (35.4 in) of X and Y, 1,020 mm (40.2 in) of Z, a 10,000 rpm standard spindle and 60 tools. The Pro 3 lists more X at 1,150 mm (45.3 in) and 80 tools, with a 6,000 RPM standard spindle.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.