The Makino Sinker EDM Machines is an industrial-grade CNC Wire & Sinker EDM powered by the Makino Hyper-i (touchscreen, all models). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino Sinker EDM Machines: range summary naming the EDAC1, EDGE2i, EDGE3i and EDNC-6 to EDNC-20 with Hyper-i control; see each model's page.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Makino Hyper-i (touchscreen, all models) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Travel X Range | 250 - 1,100 mm (9.8 - 43.3 in) |
| Travel Y Range | 200 - 800 mm (7.9 - 31.5 in) |
| Travel Z Range | 200 - 600 mm (7.9 - 23.6 in) |
| Max Workpiece Weight Range | 350 - 6,000 kg (772 - 13,228 lb) |
| Generator Current Range | 20 - 150A peak |
| Atc Capacity Range | 16 - 24 positions |
| Best Surface Finish | VDI 6 (Ra 0.15 µm) on EDNC series |
| Positioning Accuracy | ±0.001 mm (±0.00004 in) on EDNC series |
| CNC Control | Makino Hyper-i (touchscreen, all models) |
| Generator Technology | HS-Rib (High-Speed Ribbon) |
| Arc Prevention | ArcFree real-time gap monitoring |
| Flushing Technology | SGF (Super Geometric Flushing) |
| Models Available | EDAC1, EDGE2i, EDGE3i, EDNC-6, EDNC-8, EDNC-10, EDNC-15, EDNC-17, EDNC-20 |
According to secondary market equipment benchmarks for November 2026, the Makino Sinker EDM Machines is estimated between $44,000 and $91,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
The table names the EDAC1, EDGE2i, EDGE3i, EDNC-6, EDNC-8, EDNC-10, EDNC-15, EDNC-17 and EDNC-20. It summarises them as ranges rather than describing one machine, so use each model's own page for its travels, table, workpiece weight and generator.
Treat them as a rough guide only. They could not be matched to a Makino source, and they do not cover every named model: the EDAC1 has 220 mm (8.66 in) of X travel, below the listed 250 mm (9.8 in) minimum.
Of the nine models named, the EDAC1 is the smallest: a 350 x 250 mm (13.8 in x 9.8 in) table with 220 mm (8.66 in) of X, 180 mm (7.08 in) of Y and 220 mm (8.66 in) of Z.
The table lists the Makino Hyper-i touchscreen control for all named models. The control features Makino describes differ from model to model, so check the individual model page for the functions of the machine you are considering.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.