The Makino U1 Wire EDM is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino U1 Wire EDM: 200 x 160 x 110 mm travels, 0.02 – 0.2 mm wire, 30 kg workpiece, ±15° / 50 mm taper, Hyper-i (micro) control. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Y Z Travel | 200 x 160 x 110 mm |
| Max Workpiece Weight | 30 kg |
| Wire Diameter Range | 0.02 – 0.2 mm |
| Max Cutting Speed | 80 mm²/min |
| Surface Finish Ra | Ra 0.05 µm |
| Taper Angle | ±15° / 50 mm |
| Control System | Makino Hyper-i (micro) |
| Machine Weight | ~2,200 kg |
| Micromachining | UPN-01 |
According to secondary market equipment benchmarks for November 2026, the Makino U1 Wire EDM is estimated between $43,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
Travels are 200 x 160 x 110 mm in X, Y and Z, and the maximum workpiece weight is 30 kg. That covers small inserts and punches; anything larger belongs on a bigger machine such as the U32j, with 370 x 270 x 220 mm of travel.
The listed range is 0.02 – 0.2 mm. The finest wires allow very small corner radii and narrow kerfs but cut slowly; the listed maximum cutting speed is 80 mm²/min, so check which wire size a quoted speed applies to.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.