The Makino U6 Wire EDM is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino U6 Wire EDM, an older listing: 600 x 400 x 220 mm travels and a 1,000 kg part limit, compared with the current UX6 and U6 models.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Y Z Travel | 600 x 400 x 220 mm |
| Max Workpiece Weight | 1,000 kg |
| Wire Diameter Range | 0.1 – 0.3 mm |
| Max Cutting Speed | 500 mm²/min |
| Surface Finish Ra | Ra 0.1 µm |
| Taper Angle | ±30° / 100 mm |
| Control System | Makino Hyper-i |
| Machine Weight | ~5,500 kg |
According to secondary market equipment benchmarks for November 2026, the Makino U6 Wire EDM is estimated between $50,000 and $100,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
Not on the listed figures. This page lists 600 x 400 x 220 mm of travel. The current UX6 lists 650 x 450 x 420 mm (25.6 x 17.7 x 16.5 in) and a 3-Sided 910 x 710 mm table, and the U6 H.E.A.T. Extreme shares those travels. Treat this page as an older machine and confirm which build a seller is offering.
The listed figures were not checked against a Makino source, so measure the strokes against the 600 x 400 x 220 mm listed, confirm the control is a Makino Hyper-i, and run a test cut in your own material with the wire size you plan to use from the listed 0.1 – 0.3 mm range.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.