The Matsuura LM-500 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Matsuura G-Tech 31i (FANUC 31i-B5 based, touch screen). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Matsuura LM-500: 500 mm X, 300 mm Z, HSK-A50 taper, 20 tools standard, up to 338 tools and 91 pallets, workpieces Φ160 x H230 mm at 20 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Matsuura (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Matsuura G-Tech 31i (FANUC 31i-B5 based, touch screen) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | HSK-A50 |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 500 mm (19.7 in) |
| Z-Axis Travel | 300 mm (11.8 in) |
| Table Load Capacity | 100 kg (220 lb) |
| Spindle Taper | HSK-A50 |
| Tool Capacity | 20 standard |
| Through Spindle Coolant | Standard |
| CNC Control | Matsuura G-Tech 31i (FANUC 31i-B5 based, touch screen) |
| Max Work Dimensions | 100kg |
| Loading Capacity | 20kg(44lb.) |
| Max Work Diameter | Φ160 mm (Φ6.29 in) |
| Max Work Height | H230 mm (H9.05 in) |
| Max Work Load | 20 kg (44 lb.) |
| Tool Capacity Max | 338 |
| Pallet Capacity Max | 91 |
| Cnc Control | Matsuura L-Tech 31i (iHMI, 15-inch touch panel) |
According to secondary market equipment benchmarks for November 2026, the Matsuura LM-500 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
It comes with 20 tools as standard. The table gives a maximum tool capacity of 338 and a maximum pallet capacity of 91. It does not name the storage system behind those maximums, so ask Matsuura which configuration provides them.
The listed maximums are Φ160 mm (Φ6.29 in) in diameter and H230 mm (H9.05 in) in height, with a maximum work load of 20 kg (44 lb.). X travel is 500 mm (19.7 in) and Z travel 300 mm (11.8 in).
HSK-A50. That is a smaller interface than the BT40 found on the larger V.Plus-550, and it suits the small end mills and drills used on parts of this size. The table does not list a spindle speed, so confirm it before planning cutting data.
Both have 500 mm (19.7 in) of X, 300 mm (11.8 in) of Z, 20 tools as standard and a Φ160 × H230 mm workpiece limit. The LV-500 is listed with a 46,000 rpm BT30 spindle. The LM-500 uses HSK-A50 and lists maximums of 338 tools and 91 pallets for automated running.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.