The Mazak HCN-5000 NEO is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak HCN-5000 NEO: 20 in (508 mm) pallet, 1,102 lb (500 kg) load, 29 x 29 x 32 in travels, CAT No.40 12,000 rpm spindle, 40 tools, 2 pallet changer.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CAT No.40 |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 26,786 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Pallet Size | 20 in (508 mm) × 20 in (508 mm) |
| Pallet Max Workpiece Size | Ø32 in (813 mm) × 39 in (991 mm) |
| Pallet Max Load Evenly Distributed | 1,102 lb (500 kg) |
| Spindle Taper | CAT No.40 |
| Max Spindle Speed | 12,000 rpm |
| Spindle Torque Intermittent | 81.9 Nm (60 ft-lb) (40% ED) |
| Spindle Torque | 60 Nm (44 ft-lb) continuous |
| Spindle Power Intermittent | 18.5 kW (25 HP) (40% ED) |
| Spindle Motor Power | 15 kW (20 HP) continuous |
| Tool Capacity | 40 tools |
| Max Tool Diameter | Ø95 mm (3.7 in) |
| Max Tool Diameter Adjacent Empty | Ø170 mm (6.7 in) |
| Max Tool Length | 20 in (508 mm) |
| Max Tool Weight | 12 lb (5 kg) |
| X-Axis Travel | 29 in (737 mm) |
| Y-Axis Travel | 29 in (737 mm) |
| Z-Axis Travel | 32 in (813 mm) |
| Spindle Center To Pallet | 4 in (102 mm) to 33 in (838 mm) |
| Rapid Traverse X | 2,362 ipm (60 m/min) |
| Rapid Traverse Y | 2,362 ipm (60 m/min) |
| Rapid Traverse Z | 2,362 ipm (60 m/min) |
| Footprint | 103 in (2,616 mm) × 226 in (5,740 mm) (W × L, MAZATROL SmoothG) |
| Machine Height | 111 in (2,819 mm) |
| Machine Weight | 26,786 lb (12,150 kg) |
According to secondary market equipment benchmarks for November 2026, the Mazak HCN-5000 NEO is estimated between $101,500 and $205,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,573 / month.
The pallet measures 20 in (508 mm) × 20 in (508 mm). It carries 1,102 lb (500 kg) evenly distributed, and the maximum workpiece is Ø32 in (813 mm) × 39 in (991 mm). Mazak lists the machine with a 2 pallet changer.
The standard specification is 12,000 rpm with 18.5 kW (25 HP) at 40% ED and 15 kW (20 HP) continuous, which is what the HCN-5000 NEO table shows. Mazak's series page also lists a 15,000 rpm high-torque spindle (37 kW (50 HP) continuous, 200 N·m at 40% ED), an 18,000 rpm spindle (26 kW (35 HP) continuous), a 20,000 rpm spindle (26 kW (35 HP) continuous) and a 25,000 rpm spindle (15 kW (20 HP) continuous). It does not say which models each one fits.
The travels, 29 in (737 mm) × 29 in (737 mm) × 32 in (813 mm), the 12,000 rpm CAT No.40 spindle and the 40-tool magazine are the same in both tables. The HCN-5000 weighs 25,198 lb (11,430 kg) and the HCN-5000 NEO 26,786 lb (12,150 kg). The NEO belongs to the series for which Mazak describes an NC rotary table as standard equipment.
According to secondary market equipment benchmarks for November 2026, the Mazak HCN-5000 NEO is estimated between $101,500 and $205,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,573 / month.
The spindle centre travels from 4 in (102 mm) to 33 in (838 mm) above the pallet, and Y travel is 29 in (737 mm). The workpiece limit of 39 in (991 mm) in height is a clearance figure, so features near the top of a part that tall are out of reach.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.