The Mazak INTEGREX e-1250V/8 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak INTEGREX e-1250V/8: double-column 5-axis mill-turn, Ø57 in (1,448 mm) turning, 74 x 49 x 53 in travels, 5,952 lb (2,700 kg) table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | CAT50 |
| Max Table Load Capacity | 5,952 kg |
| Automatic Tool Changer (ATC) | 42 Tool Stations |
| Approx. Machine Weight | 109,127 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | Ø57 in (1,448 mm) |
| Max Workpiece Size | Ø57 in (1,448 mm) × 63 in (1,600 mm) |
| Max Table Load | 5,952 lb (2,700 kg) |
| Table Max Spindle Speed | 500 rpm |
| Table Max Torque Cont Rating | 3,434 Nm (2,533 ft-lb) (cont. rating) |
| Table Spindle Motor Cont Rating | 40 kW (53 HP) (cont. rating) |
| Table Rapid Traverse Rate C Axis | 25 rpm |
| Table Min Indexing Angle Increment C Axis | 0.0001° |
| Milling Spindle Speed | 10,000 rpm |
| Milling Spindle Max Torque 30 Min Rating | 260 Nm (192 ft-lb) (30 min. rating) |
| Milling Spindle Torque | 191 Nm (141 ft-lb) continuous |
| Milling Spindle Power Intermittent | 37 kW (50 HP) (40% ED) |
| Milling Spindle Power | 30 kW (40 HP) continuous |
| Milling Spindle Rapid Traverse Rate B Axis | 30 rpm |
| Milling Spindle Min Indexing Angle Increment B Axis | 0.0001° |
| Spindle Taper | CAT50 |
| Tool Capacity | 42 tools |
| Max Tool Diameter | Ø5 in (127 mm) |
| Max Tool Diameter Adjacent Empty | Ø10 in (254 mm) |
| Max Tool Length | 26 in (660 mm) |
| Max Tool Weight | 66 lb (30 kg) |
| X-Axis Travel | 74 in (1,880 mm) |
| Y-Axis Travel | 49 in (1,245 mm) |
| Z-Axis Travel | 53 in (1,346 mm) |
| B Axis Range | 150° |
| C Axis Range | 360° |
| Rapid Traverse X | 1,654 ipm (42 m/min) |
| Rapid Traverse Y | 1,654 ipm (42 m/min) |
| Rapid Traverse Z | 1,654 ipm (42 m/min) |
| Footprint | 205 in (5,207 mm) × 315 in (8,001 mm) (W × L) |
| Machine Height | 173 in (4,394 mm) |
| Machine Weight | 109,127 lb (49,499 kg) |
According to secondary market equipment benchmarks for November 2026, the Mazak INTEGREX e-1250V/8 is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
According to Mazak's series description, the double-column construction and an X-axis stroke that extends beyond the milling spindle allow top-face milling with only linear X- and Y-axis positioning. On this model X travel is 74 in (1,880 mm) and Y travel 49 in (1,245 mm), against a maximum turning diameter of 57 in (1,448 mm).
The table motor is rated 40 kW (53 HP) continuous with 3,434 Nm (2,533 ft-lb) of continuous torque, and the table turns at up to 500 rpm. Mazak lists the INTEGREX e-1250V/8 among the models with a direct drive table motor, used for turning and for C-axis positioning in 0.0001° increments. Maximum table load is 5,952 lb (2,700 kg).
The two share 74 in (1,880 mm) of X travel, a 5,952 lb (2,700 kg) table load and 1,654 ipm (42 m/min) rapids. The INTEGREX e-RAMTEC V/8 has a smaller maximum turning diameter of 49 in (1,245 mm) and less Y at 42 in (1,067 mm), but more Z at 63 in (1,600 mm). The INTEGREX e-RAMTEC V/8 holds 40 tools and weighs 101,413 lb (46,000 kg); the e-1250V/8 holds 42 tools and weighs 109,127 lb (49,499 kg).
The machine is configured with a 2 pallet changer. Mazak's series page lists the PALLETECH HIGH RISE SYSTEM, a two-level system marked as compatible with the INTEGREX e-1250V/8 only, and the one-level PALLETECH MANUFACTURING CELL. Mazak describes these systems as scalable and able to combine different types of Mazak machines.
The magazine holds 42 tools with a CAT50 taper. Maximum tool diameter is 5 in (127 mm), or 10 in (254 mm) with the adjacent pockets empty. Maximum tool length is 26 in (660 mm) and maximum tool weight 66 lb (30 kg).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.