The Mazak OptiPlex Champion is an industrial-grade Fiber Laser Cutting Machines powered by the MAZATROL SmoothL Advanced with Intelligent Laser Control (ILC). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak OptiPlex Champion fiber laser: 3000 x 1500 mm, 6 kW, 9 kW or 12 kW, up to 150 m/min rapids. Listed figures; not in the current lineup.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | MAZATROL SmoothL Advanced with Intelligent Laser Control (ILC) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Working Area | 3000 x 1500 mm |
| Laser Type | Fiber |
| Laser Power | 6 kW, 9 kW, or 12 kW |
| Max Sheet Thickness Mild Steel | 25 mm (12 kW) |
| Max Sheet Thickness Stainless | 20 mm (12 kW) |
| Max Sheet Thickness Aluminum | 15 mm (12 kW) |
| Max Sheet Thickness Copper | 8 mm |
| Max Sheet Thickness Brass | 8 kW |
| Positioning Accuracy | ±0.03 mm |
| Repeatability | ±0.02 mm |
| Max Axis Speed | up to 150 m/min rapid (linear motor axes) |
| Max Sheet Weight | 920 kg |
| CNC Control | MAZATROL SmoothL Advanced with Intelligent Laser Control (ILC) |
| Axis Drive | Linear motors (Y, Z), high-speed servo (X) |
According to secondary market equipment benchmarks for November 2026, the Mazak OptiPlex Champion is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
No. It does not appear in Mazak's current lineup and may be an older or regional model. The table could not be matched to a Mazak source, so the figures should be confirmed from the paperwork of any machine being considered.
Three: 6 kW, 9 kW or 12 kW, all fiber. The listed thickness limits are stated for the 12 kW version, so a 6 kW or 9 kW machine should be assessed on its own cut data.
At 12 kW the listed maximums are 25 mm in mild steel, 20 mm in stainless and 15 mm in aluminum. Copper is listed at 8 mm. The brass row of the table does not state a thickness that can be relied on.
The table lists linear motors on Y and Z and a high-speed servo on X, with rapids of up to 150 m/min. Listed positioning accuracy is ±0.03 mm and repeatability ±0.02 mm. The control is listed as MAZATROL SmoothL Advanced with Intelligent Laser Control (ILC).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.