The Mazak OptiPlex Nexus 3015 is an industrial-grade Fiber Laser Cutting Machines powered by the MAZATROL SmoothL. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak OptiPlex Nexus 3015 fiber laser: 3000 x 1500 mm, 2 kW, 4 kW or 6 kW, 20 mm mild steel at 6 kW, 120 m/min rapids. Listed figures.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | MAZATROL SmoothL |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Working Area | 3000 x 1500 mm |
| Laser Type | Fiber |
| Laser Power | 2 kW, 4 kW, or 6 kW (configuration dependent) |
| Max Sheet Thickness Mild Steel | 20 mm (6 kW) |
| Max Sheet Thickness Stainless | 15 mm (6 kW) |
| Max Sheet Thickness Aluminum | 12 mm (6 kW) |
| Max Sheet Thickness Copper | 6 mm |
| Max Sheet Thickness Brass | 6 mm |
| Positioning Accuracy | ±0.05 mm |
| Repeatability | ±0.03 mm |
| Max Axis Speed | up to 120 m/min (rapid) |
| Max Sheet Weight | 920 kg |
| CNC Control | MAZATROL SmoothL |
| Assist Gas | Oxygen, Nitrogen, Air (automated switching) |
According to secondary market equipment benchmarks for November 2026, the Mazak OptiPlex Nexus 3015 is estimated between $47,000 and $83,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
The table lists oxygen, nitrogen and air, with automated switching. That covers the usual pairing of oxygen for mild steel and nitrogen for stainless and aluminum, plus air cutting, without changing the gas setup by hand.
A fiber source of 2 kW, 4 kW or 6 kW, depending on configuration. The listed thickness limits belong to the 6 kW version, so check the nameplate of a particular machine before relying on them.
For the 6 kW version the table lists 20 mm in mild steel, 15 mm in stainless and 12 mm in aluminum. Copper and brass are each listed at 6 mm. Nothing is listed for the 2 kW and 4 kW versions.
Mazak's current lineup does not show it, so it may be an older model. The table on this page has not been verified against a Mazak page, and its figures should be treated as listed values to confirm on the machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.