The Mazak QT-Ez 10 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak QT-Ez 10: 10 in chuck lathe, 4,500 rpm, Ø3 in (76 mm) bar capacity, 12 tools, Ø16 in (406 mm) by 23 in (584 mm) turning envelope.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing | Ø27 in (686 mm) |
| Max Turning Diameter | Ø16 in (406 mm) |
| Max Turning Length | 23 in (584 mm) |
| Max Bar Capacity | Ø3 in (76 mm) |
| Chuck Size | 10 in |
| Max Spindle Speed | 4,500 rpm |
| Spindle Power Intermittent | 15 kW (20 HP) (30 min. rating) |
| Tool Capacity | 12 tools |
| X-Axis Travel | 9 in (229 mm) |
| Z-Axis Travel | 25 in (635 mm) |
According to secondary market equipment benchmarks for November 2026, the Mazak QT-Ez 10 is estimated between $42,500 and $84,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
Maximum turning diameter is Ø16 in (406 mm) and maximum turning length 23 in (584 mm), with a swing of Ø27 in (686 mm). X travel is 9 in (229 mm), Z travel 25 in (635 mm), and the spindle passes bar up to Ø3 in (76 mm).
Both turn Ø16 in (406 mm) and pass Ø3 in (76 mm) bar. The QT-Ez 12 has a 12 in chuck and a 22 kW (30 HP) (30 min. rating) motor, with a 4,000 rpm top speed and 21 in (533 mm) turning length. The QT-Ez 10 has a 10 in chuck, 15 kW (20 HP) (30 min. rating), 4,500 rpm and 23 in (584 mm). Pick the QT-Ez 12 for heavier cuts and larger blanks, the QT-Ez 10 for speed and length.
Spindle speed: 4,500 rpm against 6,000 rpm on the QT-Ez 8. In return it has a 10 in chuck in place of the 8 in chuck of the QT-Ez 8 and passes Ø3 in (76 mm) bar where the QT-Ez 8 passes Ø2 in (51 mm). The turning envelope and the 15 kW (20 HP) (30 min. rating) motor are the same.
No such rows appear in Mazak's table for the QT-Ez 10, which lists X and Z travel only. The QT-Ez 10MY lists Y travel of 4 in (102 mm). The QT-Ez 10MSY lists the same Y travel plus a second spindle with a 6 in chuck. The QT-Ez 10MY and QT-Ez 10MSY both turn a smaller diameter, Ø14 in (356 mm).
The spindle motor is listed at 15 kW (20 HP) (30 min. rating) and the top speed is 4,500 rpm. Mazak's table does not give a continuous rating or a torque figure. For long roughing cuts, size the job to the continuous output, which has to be requested from Mazak.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.