The Mazak QT-Ez 8MSY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak QT-Ez 8MSY: 8 in main chuck, 5 in second spindle, both 6,000 rpm, 4 in (102 mm) Y, 23 in (584 mm) W travel, Ø14 in (356 mm) turning diameter.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing | Ø27 in (686 mm) |
| Max Turning Diameter | Ø14 in (356 mm) |
| Max Turning Length | 22 in (559 mm) |
| Max Bar Capacity | Ø2 in (51 mm) |
| Chuck Size | 8 in |
| Max Spindle Speed | 6,000 rpm |
| Spindle Power Intermittent | 15 kW (20 HP) (30 min. rating) |
| Sub Spindle Chuck Size | 5 in |
| Sub Spindle Speed | 6,000 rpm |
| Sub Spindle Power Intermittent | 7.5 kW (10 HP) (30 min. rating) |
| Tool Capacity | 12 tools |
| X-Axis Travel | 9 in (229 mm) |
| Y-Axis Travel | 4 in (102 mm) |
| Z-Axis Travel | 24 in (610 mm) |
| W Axis Travel | 23 in (584 mm) |
According to secondary market equipment benchmarks for November 2026, the Mazak QT-Ez 8MSY is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
It carries a 5 in chuck, runs to 6,000 rpm and has a 7.5 kW (10 HP) motor on a 30 min. rating. The main spindle has an 8 in chuck, the same 6,000 rpm limit and 15 kW (20 HP) on a 30 min. rating. W-axis travel is 23 in (584 mm).
According to secondary market equipment benchmarks for November 2026, the Mazak QT-Ez 8MSY is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
The QT-Ez 8MY has the same 8 in chuck, 6,000 rpm spindle, 4 in (102 mm) of Y and 22 in (559 mm) maximum turning length, but its table has no second-spindle or W-axis rows. The 8MSY adds the 5 in chuck second spindle and 23 in (584 mm) of W travel, so the back of the part is machined without a second setup.
The QT-Ez 10MSY has a 10 in main chuck, a 6 in second chuck and Ø3 in (76 mm) bar capacity, with the main spindle limited to 4,200 rpm. The 8MSY has Ø2 in (51 mm) bar capacity and 6,000 rpm. Turning diameter, turning length and the X, Y, Z and W travels are the same, so the choice comes down to bar size against speed.
Maximum turning diameter is Ø14 in (356 mm), maximum turning length is 22 in (559 mm) and swing is Ø27 in (686 mm). Bar stock up to Ø2 in (51 mm) passes through the main spindle, and the second spindle grips in a 5 in chuck.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.