The Mazak Quick Turn Nexus 550-II is an industrial-grade CNC Lathes & Turning Centers powered by the MAZATROL SmoothG CNC. a top spindle speed of 1,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak Quick Turn Nexus 550-II: listed 610 mm (24 in) chuck, A2-15 nose, 1,800 mm (70.87 in) turning length, 4,800 Nm (3,540 ft-lb) at 25% ED.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | MAZATROL SmoothG CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 475 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 1,855 mm |
| Maximum Spindle Speed | 1,500 RPM |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Approx. Machine Weight | 22,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 830 mm (32.68 in) |
| Max Turning Length | 1,800 mm (70.87 in) |
| Swing Over Bed | 46.33" |
| Max Spindle Speed | 1,500 RPM |
| Spindle Motor Power | 45 kW (60 hp) at 25% ED; 30 kW (40 hp) continuous |
| Spindle Torque | 4,800 Nm (3,540 ft-lb) at 25% ED |
| Spindle Nose | A2-15 |
| Chuck Size | 610 mm (24 in) |
| Bar Capacity | 12.5" |
| Tool Capacity | 12-position VDI 80 turret |
| X Axis Travel | 475 mm (18.7 in) |
| Z Axis Travel | 1,855 mm (73.0 in) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Z | 25 m/min (984 ipm) |
| Machine Weight | 22,000 kg (48,502 lb) |
| CNC Control | MAZATROL SmoothG CNC |
| Brand | MAZAK |
| Cnc Control | CNC (Mazatrol Matrix Nexus 2) |
According to secondary market equipment benchmarks for November 2026, the Mazak Quick Turn Nexus 550-II is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
No, it is not in Mazak's current lineup. Anyone considering one is looking at an existing machine, so the figures that matter are those on its own plate and in its manual. The listed figures on this page are a starting point for that check.
The listed figures are a 610 mm (24 in) chuck, 1,800 mm (70.87 in) of maximum turning length, a 46.33" swing over the bed and a 12.5" bar capacity. X travel is listed at 475 mm (18.7 in) and Z travel at 1,855 mm (73.0 in).
According to secondary market equipment benchmarks for November 2026, the Mazak Quick Turn Nexus 550-II is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
Start with the points where the listed rows disagree: top spindle speed, motor power, maximum turning diameter and the control fitted. Then check the tooling, since the turret is listed as a 12-position VDI 80 type, and the site, since the listed weight is 22,000 kg (48,502 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.