The Mazak VARIAXIS J-600/5X is an industrial-grade 5-Axis Machining Centers powered by the MAZATROL SmoothAi. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VARIAXIS J-600/5X: listed 5-axis machine with a 600 mm table, 500 kg load, 730 / 510 / 510 mm travels, 12,000 rpm spindle and 30 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | MAZATROL SmoothAi |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 18.5 kW |
| Spindle Taper Interface | Standard |
| Max Table Load Capacity | 500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Diameter | 600 mm |
| Max Workpiece Diameter | 700 mm |
| Max Workpiece Height | 450 mm |
| Max Table Load | 500 kg |
| Travel X Y Z | 730 / 510 / 510 mm |
| B Axis Tilt Range | ±110° |
| C Axis Rotation | 360° |
| Spindle Speed Standard | 12,000 rpm |
| Spindle Speed Optional | 18,000 rpm |
| Spindle Motor Power | 18.5 kW |
| Tool Magazine Standard | 30 tools |
| Tool Magazine Optional | 60 tools |
| Through Spindle Coolant | 70 bar |
| CNC Control | MAZATROL SmoothAi |
According to secondary market equipment benchmarks for November 2026, the Mazak VARIAXIS J-600/5X is estimated between $127,000 and $258,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,969 / month.
No, it is not on Mazak's current model list, and its table here could not be matched to a manufacturer page. The listed figures, such as the 600 mm table, the 500 kg load and the 730 / 510 / 510 mm travels, are a guide to be confirmed against the nameplate and manuals of the machine in question.
The standard spindle is listed at 12,000 rpm and 18.5 kW, and an 18,000 rpm spindle is listed as an option. The table gives no taper, no torque and no duty rating. Through-spindle coolant is listed at 70 bar. Check which spindle the machine you are looking at was built with.
The listed maximum workpiece is 700 mm in diameter and 450 mm high, with a table load of 500 kg on a 600 mm table. The B axis is listed at ±110° of tilt and the C axis at 360°. The X travel of 730 mm is slightly more than the maximum workpiece diameter.
The VARIAXIS C-600 has the same table diameter and load, Ø23.62 in (600 mm) and 1,102 lb (500 kg), and the same 12,000 rpm standard speed with 30 tools. Travels on the VARIAXIS C-600 are 26 in (660 mm), 22 in (559 mm) and 21 in (533 mm), against the 730 / 510 / 510 mm listed here, and its spindle is rated 11 kW (15 HP) continuous.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.