The Mazak VC-Ez is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VC-Ez series: five CAT No.40 vertical machining centers, 12,000 rpm, 30 tools, X travel 30 in (762 mm) to 64.17 in (1,630 mm).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | CAT No.40 |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Models In Series | 5 models: VC-Ez 16, VC-Ez 20, VC-Ez 20 2PC, VC-Ez 26, VC-Ez 32 |
| Spindle Taper | CAT No.40 |
| Max Spindle Speed | 12,000 rpm |
| Spindle Motor 5min Rating | 18 kW (25 HP) (5 min. Rating) to 18.5 kW (25 HP) (5 min. Rating) |
| Tool Capacity | 30 tools |
| X-Axis Travel | 30 in (762 mm) to 64.17 in (1,630 mm) |
| Y-Axis Travel | 16.14 in (410 mm) to 32.08 in (815 mm) |
| Z-Axis Travel | 20.08 in (510 mm) to 30.12 in (765 mm) |
According to secondary market equipment benchmarks for November 2026, the Mazak VC-Ez is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
Mazak lists five: VC-Ez 16, VC-Ez 20, VC-Ez 20 2PC, VC-Ez 26 and VC-Ez 32. All use a CAT No.40 spindle at 12,000 rpm. Across them X travel runs from 30 in (762 mm) to 64.17 in (1,630 mm), Y from 16.14 in (410 mm) to 32.08 in (815 mm) and Z from 20.08 in (510 mm) to 30.12 in (765 mm).
The VC-Ez 16 has 30 in (762 mm) of X, 16.14 in (410 mm) of Y and 20.08 in (510 mm) of Z, with a 37.4 in (950 mm) × 14.17 in (360 mm) table. The VC-Ez 20 has 41.34 in (1,050 mm) of X, 20.08 in (510 mm) of Y and 25 in (635 mm) of Z, with a 49.21 in (1,250 mm) × 19.37 in (492 mm) table. Both list the same 12,000 rpm CAT No.40 spindle and 30 tools.
The VC-Ez 26 has 50 in (1,270 mm) × 25.98 in (660 mm) × 25 in (635 mm) of travel and a 55.12 in (1,400 mm) × 24.02 in (610 mm) table. The VC-Ez 32 has 64.17 in (1,630 mm) × 32.08 in (815 mm) × 30.12 in (765 mm) of travel and a table listed at 64.17 in (1,630 mm) × 28.35 in (720 mm).
According to secondary market equipment benchmarks for November 2026, the Mazak VC-Ez is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
The series uses Hybrid MX Roller Guideway Systems on all linear axes. Mazak says they offer more surface contact for greater load capacity, higher positioning accuracy than boxways, nearly twice the rapid traverse rate and less contamination of the coolant. The spindle is thermally controlled, and castings and ambient conditions are monitored so the axes can be adjusted.
On travel they are close in X and Y: the VC-Ez 20 has 41.34 in (1,050 mm) × 20.08 in (510 mm) and the FJV-250 has 40.16 in (1,020 mm) × 20.08 in (510 mm). Z is 25 in (635 mm) on the VC-Ez 20 and 18.11 in (460 mm) on the FJV-250. Both run to 12,000 rpm with 30 tools; the VC-Ez 20 uses CAT No.40 and the FJV-250 is listed with BT40.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.