The Mazak VC-Ez 16X is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VC-Ez 16X: 5-axis machining center, 28 x 16 x 16 in travels, CAT No.40 12,000 rpm spindle, 30 tools, B-axis -110° to +40°.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | CAT No.40 |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Taper | CAT No.40 |
| Max Spindle Speed | 12,000 rpm |
| Spindle Motor 5 Min Rating | 19 kW (25 HP) (5-min. rating) |
| Tool Capacity | 30 tools |
| X-Axis Travel | 28 in (711 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| B Axis Range | -110° to +40° |
| C Axis Range | ±360° |
According to secondary market equipment benchmarks for November 2026, the Mazak VC-Ez 16X is estimated between $121,000 and $249,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,876 / month.
28 in (711 mm) in X, 16 in (406 mm) in Y and 16 in (406 mm) in Z. The rotary axes are a B-axis with a range of -110° to +40° and a C-axis of ±360°. Mazak's table for this model does not state the table size or the table load.
In travel. The VC-Ez 20X has 32 in (813 mm) of X and 20 in (508 mm) of Y and Z, where the VC-Ez 16X has 28 in (711 mm) and 16 in (406 mm). The VC-Ez 20X shares the CAT No.40 taper, the 12,000 rpm top speed and the 30 tools.
According to secondary market equipment benchmarks for November 2026, the Mazak VC-Ez 16X is estimated between $121,000 and $249,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,876 / month.
It describes Hybrid MX roller guideways on all linear axes, a pre-tensioned ballscrew system with support at both ends, a roller gear trunnion and rotary table, precision-balanced spindle cartridges and large headstock castings. Castings and ambient thermal conditions are monitored to make axis adjustments for part-to-part consistency.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.