The Mazak VCN-700D is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the MAZATROL SmoothG CNC with Quick Mazatrol. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VCN-700D: 40-taper vertical machining center listed with 1,537 x 700 x 650 mm travels and a 2,000 kg table load. Not in Mazak's current lineup.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | MAZATROL SmoothG CNC with Quick Mazatrol |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | CAT 40 (No. 40) |
| Table / Platter / Chuck Size | 1,740 x 700 mm (68.5 x 27.5 in) |
| Max Table Load Capacity | 2,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 8,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,537 mm (60.5 in) |
| Y-Axis Travel | 700 mm (27.5 in) |
| Z-Axis Travel | 650 mm (25.6 in) |
| Max Spindle Speed | 12,000 RPM (standard); 18,000 RPM optional |
| Spindle Taper | CAT 40 (No. 40) |
| Spindle Motor Power | 30 kW (40 hp) |
| Spindle Type | Integral spindle/motor (direct drive) |
| Tool Capacity | 30 (standard); up to 48 |
| Tool Change Time | 1.3 seconds (tool-to-tool) |
| Table Size | 1,740 x 700 mm (68.5 x 27.5 in) |
| Max Table Load | 2,000 kg (4,409 lb) |
| Rapid Traverse | 42 m/min (1,654 ipm) |
| Machine Weight | 8,500 kg (18,739 lb) |
| CNC Control | MAZATROL SmoothG CNC with Quick Mazatrol |
| Guide Type | Linear roller guides (all axes) |
According to secondary market equipment benchmarks for November 2026, the Mazak VCN-700D is estimated between $55,500 and $99,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $860 / month.
No. The VCN-700D is not in Mazak's current lineup and may be an older model. The listed figures, such as 1,537 mm (60.5 in) of X travel and a 1,740 x 700 mm (68.5 x 27.5 in) table, should be confirmed against the documents of the specific machine.
Confirm which spindle is fitted, since 12,000 RPM is listed as standard and 18,000 RPM as an option, and whether the magazine holds 30 tools or the larger 48. Check the travels of 1,537 mm (60.5 in), 700 mm (27.5 in) and 650 mm (25.6 in) by jogging each axis to its limits, and ask for the spindle output data, because the listed 30 kW (40 hp) has no duty rating.
The listed machine weight is 8,500 kg (18,739 lb) and the listed table load is 2,000 kg (4,409 lb). Size the crane or skates and the floor for the machine weight, and count fixture, rotary table and part together against the table limit.
The table describes it as an integral spindle/motor with direct drive and a CAT 40 taper. Listed speed is 12,000 RPM as standard with 18,000 RPM optional, and listed power is 30 kW (40 hp). No gearbox or torque figure appears in the table.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.