The Mazak VTC-760C is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the MAZATROL SmoothG. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VTC-760C: traveling column machining center listed with 3,000 mm (118.1 in) X travel, 50-taper spindle and a 4,000 kg (8,818 lb) table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | MAZATROL SmoothG |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 82.68" × 25" |
| Max Table Load Capacity | 4,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 16,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 3,000 mm (118.1 in) |
| Y-Axis Travel | 760 mm (29.9 in) |
| Z-Axis Travel | 660 mm (26.0 in) |
| Max Spindle Speed | 6000 min-1(rpm) |
| Spindle Taper | BT 50 |
| Spindle Motor Power | 30 kW (40 hp) |
| Tool Capacity | 30 (arm-type ATC); 48 optional |
| Table Size | 82.68" × 25" |
| Max Table Load | 4,000 kg (8,818 lb) |
| Rapid Traverse | 36 m/min (1,417 ipm) |
| Machine Weight | 16,500 kg (36,376 lb) |
| CNC Control | MAZATROL SmoothG |
| Machine Type | Vertical traveling column |
| Guide Type | Linear roller guides (all axes) |
| Tool Shank | CAT No.50 |
According to secondary market equipment benchmarks for November 2026, the Mazak VTC-760C is estimated between $57,500 and $102,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $891 / month.
The listed X travel is 3,000 mm (118.1 in), with 760 mm (29.9 in) of Y and 660 mm (26.0 in) of Z. Mazak notes for the VTC series that no equipment is mounted at the ends of the long table, so a workpiece can overhang; only the features inside the X travel can be reached without moving the part.
Mazak describes the long table of the VTC series as usable for multiple-piece machining or as a substitute for a two-pallet changer. An optional center partition is described for the VTC-530/20 specifically. Whether a partition is offered for the VTC-760C is not stated, so ask Mazak.
X travel is nearly the same: 3,000 mm (118.1 in) listed for the VTC-760C against 118 in (2,997 mm) for the VTC-800/30SR. The VTC-800/30SR has a CAT No.40 spindle at 18,000 rpm, 1,968 ipm (50 m/min) rapids and 32 in (813 mm) of Y. The VTC-760C is listed with a 50-taper spindle, 36 m/min (1,417 ipm) rapids and a 4,000 kg (8,818 lb) table load.
The listed machine weight is 16,500 kg (36,376 lb), and the table is listed for a further 4,000 kg (8,818 lb) of workpiece and fixture. Check floor capacity for the combined load and plan door openings and crane capacity before the machine arrives.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.