The Mazak SYNCREX 20/7 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak SYNCREX 20/7 Swiss-type lathe: Ø0.75 in (19 mm) bar, 8.07 in (205 mm) turning length, 10,000 rpm main and sub spindles, 29 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 29 Tool Stations |
| Approx. Machine Weight | 7,850 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | Ø0.75 in (19 mm) |
| Max Turning Length | 8.07 in (205 mm) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Power Intermittent | 3.7 kW (5 HP) (40% ED) |
| Sub Spindle Speed | 10,000 rpm |
| Sub Spindle Power Intermittent | 3.7 kW (5 HP) (40% ED) |
| Tool Capacity | 29 tools |
| Turret Od | 8 |
| Turret Cross Live Tool | 4 |
| Turret Back Working | 8 |
| Turret End Working Tools | 2 |
| Turret Boring Bar Holder Main Sub | 4 / 4 |
| Rapid Traverse X | 1,378 ipm (35 m/min) |
| Rapid Traverse Y | 1,378 ipm (35 m/min) |
| Rapid Traverse Z | 1,378 ipm (35 m/min) |
| Rapid Traverse X2 Axis | 1,378 ipm (35 m/min) |
| Rapid Traverse Y2 Axis | 1,378 ipm (35 m/min) |
| Rapid Traverse Z2 Axis | 1,378 ipm (35 m/min) |
| Footprint | 48.23 in (1,225 mm) × 88.58 in (2,250 mm) (W × D, MAZATROL SmoothSt) |
| Machine Height | 66.93 in (1,700 mm) |
| Machine Weight | 7,850 lb (3,561 kg) |
Our best estimate for the Mazak SYNCREX 20/7 is $180,000 - $290,000. This is an estimate for a swiss-type lathes in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-syncrex-20-7#price; the request is passed to Yamazaki Mazak or an authorised dealer.
The table lists a maximum turning diameter of Ø0.75 in (19 mm) and a maximum turning length of 8.07 in (205 mm). Mazak's series page groups the model with the Ø20 mm to Ø25 mm machines. For larger stock the SYNCREX 25/7 takes Ø1 in (25 mm) with the same turning length.
29 tools. Among them the table lists 4 cross live tools, 2 end working tools and boring bar holders as 4 / 4 for main and sub. The SYNCREX 20/8 lists 33 tools and the SYNCREX 20/9 lists 36 tools, on the same bar size and spindle speed.
The main spindle and the sub spindle are each rated 3.7 kW (5 HP) at 40% ED, and each runs to 10,000 rpm. Mazak's table gives no continuous rating for either, so treat the figure as an intermittent rating when planning long cuts in tough material.
The machine is 48.23 in (1,225 mm) wide and 88.58 in (2,250 mm) deep with the MAZATROL SmoothSt control, 66.93 in (1,700 mm) high, and weighs 7,850 lb (3,561 kg). The row does not mention a bar feeder, so allow for its length and for room to load bar stock separately.
For the SYNCREX series Mazak describes an HDCC machine base made as a solid one-piece casting. Its series page states that the base is 10% more rigid than cast iron, gives 80% less vibration at the cutting point and 30% longer tool life, with less thermal distortion. These are Mazak's statements for the series, not measurements for this model.
