The Nakamura-Tome JX-50 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome JX-50 turn-mill center: 30,000 rpm NT Smart Cube tool spindle, 60 tools (119 optional), twin 6,000 rpm spindles, 42 mm bar.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 280 mm (11.0 in) with tool spindle / 220 mm (8.7 in) with lower turret |
| Max Turning Length | 650 mm (25.6 in) |
| Bar Capacity | 42 mm (1.7 in) (L/R spindles) |
| Chuck Size | 5", 6" |
| Max Spindle Speed | 6,000 rpm (L/R spindles) |
| Spindle Motor Power | 11 kW / 7.5 kW (14.8 hp / 10.1 hp) (L/R spindle drive motor) |
| Tool Spindle Speed Max | 30,000 rpm |
| Tool Spindle Unit | NT Smart Cube, 299 mm (11.8 in) long |
| Tool Capacity | 60 tools (119 optional) |
| Tool Change Time | 3.3 s (chip-to-chip) |
| Machine Dimensions | 4,264.4 mm W x 2,378 mm D x 2,250 mm H (2,530.5 mm with indicator light) (167.9 x 93.6 x 88.6 in) |
| Machine Body Footprint | 3,000 x 2,000 mm (118.1 x 78.7 in), excluding chip tank and conveyor |
| Front To Spindle Center | 450 mm (17.7 in) |
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome JX-50 is estimated between $47,000 and $83,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
It is the JX-50's tool spindle unit, listed at 299 mm (11.8 in) long and running to 30,000 rpm. It is fed from a 60-tool magazine (119 optional) with a 3.3 s chip-to-chip change, and with it the machine turns up to 280 mm (11.0 in) in diameter.
The figure depends on the tool doing the cutting. With the tool spindle the maximum is 280 mm (11.0 in); with the lower turret it is 220 mm (8.7 in). Plan large-diameter turning on the tool spindle, or keep parts under 220 mm (8.7 in) if both tools must reach them.
Both the left and right spindles take bar up to 42 mm (1.7 in), run to 6,000 rpm and are rated 11 kW / 7.5 kW (14.8 hp / 10.1 hp). Chucks are 5 in or 6 in. Turning length is 650 mm (25.6 in).
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome JX-50 is estimated between $47,000 and $83,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.