The Nakamura-Tome SC-100X2 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome SC-100X2: two 6,000 RPM spindles (11/7.5 kW left, 7.5/5.5 kW right), 195 mm turning diameter, 400 mm turning length, 80 mm Y.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 195 mm (7.7 in) |
| Max Turning Length | 400 mm (15.7 in) |
| Chuck Size Left | 6 inch |
| Chuck Size Right | 5 inch (6 inch optional) |
| Bar Capacity Left | 51 mm |
| Bar Capacity Right | 42 mm |
| Spindle Speed Left | 6,000 RPM |
| Spindle Power Left | 11/7.5 kW (15/10 hp) |
| Spindle Speed Right | 6,000 RPM |
| Spindle Power Right | 7.5/5.5 kW (10/7.4 hp) |
| Milling Motor | 7.1/2.2 kW at 6,000 RPM |
| Travel X Right | 150 mm (5.9 in) |
| Travel Z Right | 200 mm (7.9 in) |
| Y Axis Stroke | 80 mm (+/-40 mm) |
| Distance Between Spindles | max. 600 mm (23.6 in) / min. 200 mm (7.9 in) |
| L R Bar Capacity | 51mm/42mm |
| L R Chuck Size | 6″/5″(6″) |
| L R Spindle Speed | 6,000min-1/6,000min-1 |
| L R Spindle Drive Motor | 11/7.5kW / 7.5/5.5kW |
| X Slide Travel On R Spindle | 150mm |
| Z Slide Travel On R Spindle | 400mm |
| Max Spindle Speed | 6,000 rpm / 6,000 rpm |
| Spindle Motor Power | 11 / 7.5 kW / 7.5 / 5.5 kW |
| Footprint | 3,072 × 1,973.7 × 1,799 mm (W × D × H) |
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome SC-100X2 is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
Both run to 6,000 RPM. The left is rated 11/7.5 kW (15/10 hp) with a 6 inch chuck and 51 mm bar capacity. The right is rated 7.5/5.5 kW (10/7.4 hp) with a 5 inch chuck, 6 inch as an option, and 42 mm bar capacity.
The SC-100 turns 230 mm (9.1 in) in diameter and its left spindle tops out at 5,000 rpm. The SC-100X2 turns 195 mm (7.7 in), runs both spindles to 6,000 RPM and puts its right spindle on a slide with 150 mm (5.9 in) of X travel. Both list 400 mm (15.7 in) of turning length.
The milling motor is listed at 7.1/2.2 kW at 6,000 RPM, and the Y-axis stroke is 80 mm (+/-40 mm). That supports cross drilling, tapping and flats on small parts. The table does not give a turret station count.
The distance between spindles is listed as max. 600 mm (23.6 in) and min. 200 mm (7.9 in). The right spindle moves within that range, so it can close in on short parts for the handover and back off for longer ones.
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome SC-100X2 is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.