The Nakamura-Tome SC-300L is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 32i-B. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome SC-300L listed figures: 12-inch chuck, 620 mm turning diameter, 1,000 mm between centers, 22 kW 3,500 RPM spindle, 12-station turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 9,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Chuck Diameter | 380 mm (15 in) — 12-inch chuck standard |
| Max Turning Diameter | 620 mm (24.4 in) over cross slide |
| Max Turning Length | 1,000 mm (39.4 in) between centers |
| Max Bar Capacity | 91 mm (3.58 in) |
| Max Spindle Speed | 3,500 RPM |
| Spindle Motor Power | 22 kW (30 hp) |
| Spindle Torque | 1,432 Nm (1,056 ft-lb) peak |
| Spindle Nose | A2-8 |
| Turret Stations | 12 stations (live tooling optional) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Z | 24 m/min (945 ipm) |
| CNC Control | Fanuc 32i-B |
| Positioning Accuracy | ±0.004 mm |
| Machine Weight | 9,000 kg (19,842 lb) approx. |
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome SC-300L is estimated between $40,000 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $620 / month.
The listed figures give 620 mm (24.4 in) of turning diameter over the cross slide and 1,000 mm (39.4 in) between centers, with a 12-inch chuck as standard. Confirm these with Nakamura-Tome before planning work around them.
The table lists 22 kW (30 hp), 1,432 Nm (1,056 ft-lb) of peak torque, a top speed of 3,500 RPM and an A2-8 spindle nose. Bar capacity is listed as 91 mm (3.58 in).
The SC-300IIL lists 360 mm (14.2 in) of turning diameter, 1,135 mm (44.7 in) of turning length, a 22 / 18.5 kW spindle at 3,500 rpm and a 12-station turret. The SC-300L figures on this page differ in swing and length, so treat them as unconfirmed until checked against a specification sheet or the machine itself.
The table gives 9,000 kg (19,842 lb) approx. Check floor loading and rigging access before delivery, and confirm the weight for the specific machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.