The Nakamura-Tome WT-100 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome WT-100: two turrets, up to 48 tools, twin 6,000 rpm 11/7.5 kW spindles, 190 mm turning diameter, 503 mm turning length, 42 mm bar.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 48 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 190 mm (7.5 in) |
| Max Turning Length | 503 mm (19.8 in) |
| Spindle Motor Power | 11 / 7.5 kW |
| Turrets | 2 with mid-position indexing |
| Tool Capacity | Up to 48 |
| Milling | 7.1/2.2 kW each (x2) |
| Chuck Size | 6 in |
| L R Spindle Speed | 6,000min-1 |
| L Spindle Drive Motor | 11/7.5kW |
| R Spindle Drive Motor | 11/7.5kW |
| Max Bar Capacity | 42 mm (1.7 in) |
| Max Spindle Speed | 6,000 rpm |
| Sub Spindle Power | 11 / 7.5 kW |
| Footprint | 2,630 × 1,923 × 1,940 mm (W × D × H) |
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome WT-100 is estimated between $42,500 and $84,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
Two turrets, listed with mid-position indexing, and a tool capacity of up to 48. Each turret has its own 7.1/2.2 kW milling drive, so both can run driven tools at the same time.
Yes. The left and right spindles are both rated 11/7.5kW and both run to 6,000 rpm, each with a 6 in chuck. The second operation therefore has the same power and speed as the first.
The WT-150II has a 15 / 11 kW main spindle at 5,000 rpm, 515 mm (20.3 in) of turning length and 51 mm (2 in) bar capacity. The WT-100 runs both spindles to 6,000 rpm at 11/7.5kW, turns 503 mm (19.8 in) and takes 42 mm (1.7 in) bar. Both list 190 mm (7.5 in) of turning diameter.
42 mm (1.7 in). That suits small turned parts such as fittings, pins and valve components; larger stock needs a machine with a bigger spindle bore.
According to secondary market equipment benchmarks for November 2026, the Nakamura-Tome WT-100 is estimated between $42,500 and $84,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.