The Okuma LB3000 EX II is an industrial-grade CNC Lathes & Turning Centers powered by the Okuma OSP-P300LA-e. a top spindle speed of 5,000 RPM, and a 2-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
The Okuma LB3000 EX II Space Center is built on Okuma Thermo-Friendly Concept with PREX motor technology for unmatched thermal stability, rapid cycle times, and sub-micron repeatability.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Okuma (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Okuma OSP-P300LA-e |
| Number of Controlled Axes | 2-Axis Simultaneous / Positioning |
| X-Axis Travel | 260 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 560 mm |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | A2-6 / A2-8 |
| Table / Platter / Chuck Size | 8" / 10" Chuck |
| Max Table Load Capacity | 400 kg |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Rapid Traverse Rate | 30 m/min |
| Approx. Machine Weight | 5,100 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Dia | 410 mm |
| Max Turning Length | 560 mm |
| Spindle Speed | 5,000 RPM |
| Motor Power | 22 kW |
| Machine Weight | 5,100 kg |
PREX is Okuma permanent magnet reluctance motor delivering high torque at low RPM for heavy threading and high efficiency at high RPM for mirror finishes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.