The Sodick AG400LH is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN (Linear iQ) control. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG400LH wire EDM, an older model: 400 x 300 mm X/Y with a listed 420 mm Z, 680 x 500 mm table, 800 kg part weight, 5,200 kg machine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN (Linear iQ) control |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 680 x 500 mm |
| Approx. Machine Weight | 5,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 680 x 500 mm |
| X-Axis Travel | 400 mm |
| Y-Axis Travel | 300 mm |
| Z-Axis Travel | 420 mm |
| Max Workpiece Weight | 800 kg |
| Max Workpiece Height | 420 mm |
| Generator Power | Digital solid-state transistor generator, 16A peak |
| Surface Finish | Ra 0.2 µm (precision finish capable) |
| CNC Control | Sodick LN (Linear iQ) control |
| Machine Weight | 5,200 kg |
According to secondary market equipment benchmarks for November 2026, the Sodick AG400LH is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
No. It is not in Sodick's current lineup and is most likely an older model, so it is sold used. The listed figures could not be checked against a manufacturer page.
The listed figures give X 400 mm, Y 300 mm and Z 420 mm, with a 680 x 500 mm table and a maximum workpiece height of 420 mm. U/V travel is not listed.
Both move 400 mm in X and 300 mm in Y. The AL400G has 250 mm of Z and weighs 3,400 kg; the AG400LH is listed with 420 mm of Z and 5,200 kg. Measure the Z stroke on any used AG400LH before relying on it.
The listed figure is 800 kg on a 680 x 500 mm table. Add the 5,200 kg machine weight when checking the floor for a used unit.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.