The Sodick AG40L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG40L sinker EDM: 400 x 300 mm X/Y travel, 600 x 400 mm table, 750 x 620 x 350 mm tank, 550 kg workpieces, linear motors. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 400 mm (15.75 in) |
| Y-Axis Travel | 300 mm (11.81 in) |
| Z-Axis Travel | 270 mm (10.63 in) |
| Work Table Size | 600 x 400 mm (23.6 x 15.75 in) |
| Work Tank Dimensions | 750 x 620 x 350 mm (29.5 x 24.4 x 13.8 in) |
| Max Workpiece Weight | 550 kg (1,213 lb) |
| Electrode To Table Clearance | 150 - 420 mm (5.9 - 16.5 in) |
| Axis Feed Rate | 36,000 mm/min (1,400 ipm) |
| Acceleration | 1.2G |
| Drive System | Linear motors (X, Y, Z) |
| Generator | TMM3 power supply |
| Surface Finish | VDI 12 / Ra 0.40 um with graphite |
| Electrode Wear | Near-zero on finishing (zero-wear circuit) |
| CNC Control | Sodick LQ controller |
| Machine Dimensions | 1,550 x 2,350 x 2,330 mm (61.0 x 92.5 x 91.7 in) |
| Machine Weight | 3,900 kg (8,598 lb) |
| X Y Travel | 400 x 300 mm (15.7 x 11.8 in) |
| Z Travel | 250 mm (9.8 in) |
| U V Travel | ±40 mm (±1.6 in) |
| Max Workpiece Dimensions | 750 x 600 x 250 mm |
| Wire Diameter Range | 0.1 – 0.3 mm (brass or coated wire) |
| Max Cutting Speed | 350 mm²/min (in 50 mm steel with 0.25 mm wire) |
| Max Taper Angle | ±30° over 80 mm height |
| Auto Wire Threading | Yes — water-jet assist |
| Machine Footprint | Approx. 1,800 x 2,100 mm |
| Power Supply | 200V, 3-phase, 50/60 Hz |
According to secondary market equipment benchmarks for November 2026, the Sodick AG40L is estimated between $42,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
According to secondary market equipment benchmarks for November 2026, the Sodick AG40L is estimated between $42,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
A sinker EDM. The table on this page includes wire diameter, taper angle, U/V travel and wire threading rows that belong to a wire machine. They do not describe the AG40L, which has a work table, a 750 x 620 x 350 mm work tank and linear motors on X, Y and Z.
The AL40G+ has 15.75 in (400 mm) of X, 11.81 in (300 mm) of Y and 10.63 in (270 mm) of Z on a 600 × 400 mm table, the same travels and table that the AGL Series Sinker EDM page gives for the AG40L. The AL40G+ weighs 9,039 lb (4,100 kg).
The listed supply is 200V, 3-phase, 50/60 Hz. The machine measures 1,550 x 2,350 x 2,330 mm (61.0 x 92.5 x 91.7 in) and weighs 3,900 kg (8,598 lb), so plan rigging and floor loading for close to four tonnes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.