The Sodick AL400P is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AL400P wire EDM: 400 x 300 x 250 mm travels, 600 x 470 x 240 mm and 500 kg workpiece, ±25° taper at 130 mm, 0.05-0.30 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 7,496 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Work Tank Size | 33.46 in × 24.02 in (850 × 610 mm) |
| X-Axis Travel | 15.78 in (400 mm) |
| Y-Axis Travel | 11.81 in (300 mm) |
| Z-Axis Travel | 9.84 in (250 mm) |
| Uv Axis Travel | 5.91 in × 5.91 in (150 × 150 mm) |
| Max Taper Angle | ±25° plate thickness: 5.12 in (130 mm) |
| Max Workpiece Size | 23.62 in × 18.50 in × 9.49 in (600 × 470 × 240 mm) |
| Max Workpiece Weight | 1,102.3 lb (500 kg) |
| Wire Diameter | .002 in - .012 in (0.05 - 0.30 mm) |
| Wire Tension | 3 - 23 N |
| Wire Feed Rate | 16.54 in/sec (420 mm/sec) |
| Floor To Table | 39.17 in (995 mm) |
| Footprint | 83.27 in × 98.43 in × 87.80 in (2,115 × 2,500 × 2,230 mm) |
| Machine Weight | 7,496 lb (3,400 kg) |
| Power Supply | 3-phase 50/60 Hz 13 kVA |
According to secondary market equipment benchmarks for November 2026, the Sodick AL400P is estimated between $48,500 and $98,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
The AL600P moves 23.62 in (600 mm) in X, 15.75 in (400 mm) in Y and 13.78 in (350 mm) in Z, against 15.78 in (400 mm), 11.81 in (300 mm) and 9.84 in (250 mm) on the AL400P. The AL600P also weighs 10,141 lb (4600 kg) against 7,496 lb (3,400 kg). Both have 5.91 in × 5.91 in (150 × 150 mm) of U/V travel.
23.62 in × 18.50 in × 9.49 in (600 × 470 × 240 mm) and 1,102.3 lb (500 kg). The part can be larger than the 400 × 300 mm travel, but only the area the wire can reach within those travels can be cut in one setup.
±25° at a plate thickness of 5.12 in (130 mm). The U and V axes have 5.91 in × 5.91 in (150 × 150 mm) of stroke. Because that stroke is fixed, check the angle you need on any section thicker than the quoted plate before quoting the job.
The two share 400 mm of X, 300 mm of Y, 250 mm of Z and a machine weight of 3,400 kg. The AL400G's table separates flushing and submerged limits, 500 kg and 350 kg, while the AL400P's table gives a single 1,102.3 lb (500 kg) figure, so ask which mode it refers to.
A floor area of 83.27 in × 98.43 in (2,115 × 2,500 mm) with 87.80 in (2,230 mm) of height, support for 7,496 lb (3,400 kg), and a 3-phase 50/60 Hz supply of 13 kVA. The table top is 39.17 in (995 mm) above the floor.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.