The Sodick AL800G is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AL800G wire EDM: 800 x 600 x 500 mm travels, 200 x 200 mm U/V, flushed parts to 1,250 x 1,020 x 500 mm and 3,000 kg, 0.1-0.3 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 500 mm |
| Uv Axis Travel | 200 × 200 mm |
| Max Taper Angle | ± 25 °(plate thickness:130 mm) |
| Max Workpiece Size Flushing | 1,250 × 1,020 × 500 mm |
| Max Workpiece Weight Flushing | 3,000 kg |
| Wire Diameter | 0.1 - 0.3 mm |
| Wire Tension | 3 - 23 N |
| Max Wire Feed Rate | 420 mm/sec |
| Floor To Table | 995 mm |
| Footprint | 3,395 × 3,640 × 2,780 mm |
| Installation Footprint | 4,675 × 5,050 mm |
| Machine Weight | 6,000 kg |
| Power Supply | 3-phase 50/60 Hz 13 kVA |
According to secondary market equipment benchmarks for November 2026, the Sodick AL800G is estimated between $44,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
With flushing, 1,250 × 1,020 × 500 mm and up to 3,000 kg. The cut path has to fall within 800 mm of X and 600 mm of Y. Sodick's table does not give a submerged limit for this model, so confirm it if you plan to cut submerged.
Both move 800 mm in X and 600 mm in Y. The AL800G has 500 mm of Z against 250 mm on the AL800P, and weighs 6,000 kg against 5750 kg. Pick the AL800G whenever parts are thicker than the 240 mm the AL800P accepts.
The AL800G's U and V axes move 200 × 200 mm, against 150 × 150 mm on the AL600G. Both quote ± 25° at 130 mm thickness, so the extra stroke matters mostly when holding an angle on parts taller than that, which the 500 mm of Z allows.
0.1 to 0.3 mm, with 3 to 23 N of tension and a wire feed rate of up to 420 mm/sec. The AL400G lists 0.05 mm at the fine end, so very small radii are better cut on that machine.
According to secondary market equipment benchmarks for November 2026, the Sodick AL800G is estimated between $44,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.