The Sodick ALC400G is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick ALC400G wire EDM: 400 x 300 x 250 mm travels, 150 x 150 mm U/V, 500 kg workpiece, 850 x 610 mm tank, 0.05-0.30 mm wire with options.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 7,496 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 15.75 in (400 mm) |
| Y-Axis Travel | 11.81 in (300 mm) |
| Z-Axis Travel | 9.84 in (250 mm) |
| Uv Axis Travel | 5.91 in × 5.91 in (150 × 150 mm) |
| Wire Diameter | 0.002 in - 0.012 in (0.05 - 0.30 mm) (With Available Options) |
| Work Tank Size | 33.45 in × 24.01 in (850 × 610 mm) |
| Max Workpiece Weight | 1,102 lb (500 kg) |
| Floor To Table | 39.17 in (995 mm) |
| Footprint | 83.27 in × 98.43 in × 87.80 in (2,115 × 2,500 × 2,230 mm) |
| Machine Weight | 7,496 lb (3,400 kg) |
According to secondary market equipment benchmarks for November 2026, the Sodick ALC400G is estimated between $49,500 and $99,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
X 15.75 in (400 mm), Y 11.81 in (300 mm) and Z 9.84 in (250 mm), with 5.91 in × 5.91 in (150 × 150 mm) of U/V travel. The work tank is 33.45 in × 24.01 in (850 × 610 mm).
The table gives 0.002 in - 0.012 in (0.05 - 0.30 mm) and adds "With Available Options". Ask for the wire range of the configuration being quoted, especially if you need the fine end for small inside radii.
Travels, tank, U/V and the 1,102 lb (500 kg) part limit are the same. The ALN400G weighs 7,385 lb (3,350 kg) against 7,496 lb (3,400 kg) and has a footprint of 86.22 in × 95.47 in × 86.81 in (2190 × 2425 × 2205 mm) against 83.27 in × 98.43 in × 87.80 in.
A floor area of 83.27 in × 98.43 in (2,115 × 2,500 mm), 87.80 in (2,230 mm) of height and support for 7,496 lb (3,400 kg) plus the part and dielectric. The table gives no power figure, so request the electrical requirement with the quotation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.