The Sodick AP30L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AP30L sinker EDM: 11.81 x 9.84 x 7.87 in (300 x 250 x 200 mm) travels, 500 x 350 mm table, 200 kg workpiece, 120 L dielectric.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 19.69 in × 13.78 in (500 × 350 mm) |
| Approx. Machine Weight | 7,981 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 11.81 in (300 mm) |
| Y-Axis Travel | 9.84 in (250 mm) |
| Z-Axis Travel | 7.87 in (200 mm) |
| Table Size | 19.69 in × 13.78 in (500 × 350 mm) |
| Work Tank Size | 27.95 in × 21.26 in × 12.99 in (710 × 540 × 330 mm) |
| Work Tank Fluid Level | 5.12 in - 10.24 in (130 - 260 mm) |
| Dielectric Capacity | 31.70 gal (120 L) |
| Floor To Table | 30.71 in (780 mm) |
| Footprint | 44.88 in × 66.14 in × 76.77 in (1,140 × 1,680 × 1,950 mm) |
| Max Workpiece Weight | 440.9 lb (200 kg) |
| Machine Weight | 7,981 lb (3,620 kg) |
According to secondary market equipment benchmarks for November 2026, the Sodick AP30L is estimated between $43,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
The table is 19.69 in × 13.78 in (500 × 350 mm) and the workpiece limit is 440.9 lb (200 kg). The electrode reaches 11.81 in × 9.84 in (300 × 250 mm) of it, and the tank is 27.95 in × 21.26 in × 12.99 in (710 × 540 × 330 mm) inside, so a fixture can be wider than the stroke but must stay inside the tank.
The fluid level is adjustable from 5.12 in to 10.24 in (130 - 260 mm). For submerged burning the feature being cut must sit below the chosen level, so check the height of the cut above the table, not just the overall part height. The reservoir holds 31.70 gal (120 L).
The AD35L travels 13.78 in (350 mm) in X, 9.84 in (250 mm) in Y and 10.63 in (270 mm) in Z on a 23.62 in × 15.74 in (600 × 400 mm) table and weighs 7,054 lb (3,200 kg). The AP30L has 11.81 × 9.84 × 7.87 in (300 × 250 × 200 mm) of travel on a 19.69 in × 13.78 in (500 × 350 mm) table and weighs 7,981 lb (3,620 kg).
According to secondary market equipment benchmarks for November 2026, the Sodick AP30L is estimated between $43,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.